Rental Agencies West Bend

Equipment Rentals Inc

Rental Agencies West Bend
Call Now for Equipment Rentals!

Address
2001 Decorah Rd
Place
West Bend, WI   53095 
Landline
(262) 338-6256
E-Mail
jeff@eqrents.com
Twitter
@EquipmentR_Inc
Facebook
Equipment-Rentals-Celebrations-Party-Rentals-32422
Video
www.youtube.com
Website
www.eqrents.com

Description

Equipment Rentals, Inc. has served all of Southeastern Wisconsin since 1979 with the finest in equipment rentals, party rentals, and service. Homeowners, contractors, municipalities, industry, and caterers are among the many customers that we proudly serve. Our two rental store locations in West Bend and Hartford WI allow us to serve the entire Southeastern Wisconsin area. Our fleet of delivery vehicles gives us the flexibility to bring equipment to you....when you need it. Competent, knowledgeable staff with over 100 years of combined equipment rental and party rental experience sets us apart from our competition, 7 days a week. From "bounce houses to backhoes".... we have one of the most complete rental inventories in Southeastern Wisconsin. Most importantly, our party rental inventory and equipment rental inventory is top quality, constantly updated, and professionally maintained.

Keywords equipment rentals, rentals, party equipment rental, Building equipment, scaffolding, welder, air compressor, ATV attachments, Automotive tool, Backhoe & excavator, Blade sales, Compaction equipment, Concrete equipment, Contractor, drywall tool, floor care, floor care chemcial, floor care pad, generator & pump, hammer drill, heater, ladder, lawn & garden, lawn & landscape, lift, moving & loading, moving supply, nailer & stapler, painting equipment, plumbing tool, power tool, pressure washer, safety supply, skidloader, skidloader attachment, towing supply, tractor & attachments, trailer, trailer accessory, trencher.

Reviews

This listing was not reviewed yet:

Opening hours

Payment Options

American Express , Visa , Cash , Discover , MasterCard

Products And Services

  • AIR COMPRESSOR, 185 CFM

    This towable 185 CFM compressor can handle just about all but the largest compressor needs. From sandblasting, to demolition with an air hammer, to blowing out water lines in fall this will take on all jobs. -Unit weighs 2500lbs. and requires a 2" ball for transport. -Runs up to 185CFM at 120 PSI -Rate includes 100' of hose -Additional hose and attachments available for a extra charge.

    Link: AIR COMPRESSOR, 185 CFM

  • AIR COMPRESSOR, 8HP GAS

    The 8hp air compressor will deliver 15.3CFM at 100PSI. This compressor works best to provide air for our small sandblaster, nail guns, etc. -Comes with 100 ft. of air hose (more hose available for additional charge)

    Price: 4.00 Hour: $36.00 Daily: $50.00 Weekly: $150.00

    Link: AIR COMPRESSOR, 8HP GAS

  • AIR COMPRESSOR,1.5HP

    Small 1.5hp compressor that is capable of running 4.1 CFM @ 100PSI. -Handles most nail guns, recharging wells, and small spray guns -Can handle 2 finish or 2 roofing nailers, but only 1 framing nailer May be slight delay while compressor catches up when running 2 guns

    Price: 4.00 Hour: $18.00 Daily: $24.00 Weekly: $72.00

    Link: AIR COMPRESSOR,1.5HP

  • HOSE, 3/4" AIR

    UNIVERSAL ( CHICAGO ) TYPE FITTING USED WITH OUR 185 AIR COMPRESSORS

    Link: HOSE, 3/4" AIR

  • HOSE, 3/8" X 50' AIR

    1/4" FITTINGS ON HOSE USED WITH 1 1/2 HP ELECTRIC AIR COMPRESSOR, USED WITH 5HP GAS COMPRESSOR OR 8HP GAS COMPRESSOR

    Link: HOSE, 3/8" X 50' AIR

  • DISC / CULTIVATOR, TOW BEHIND

    Towable disc/cultivator for use behind a 4-wheeler or a large garden tractor with a 2" ball hitch. -Excellent for small food plots and breaking up hard ground -can be angled -Disc Width = 45" -Dimensions = 84"L x 60"W x 32"H -This is best transported on a trailer

    Price: 4.00 Hour: $40.00 Daily: $60.00 Weekly: $180.00

    Link: DISC / CULTIVATOR, TOW BEHIND

  • DRAG / HARROW

    Harrow drag for ATV's and garden tractors. -Can configure tines for different applications (spreading, aerating, thatching, breaking up soil, etc.) -Requires a 12 hp motor or larger to tow unit -Drag is 6' x 8' in two pieces -Requires a large pickup bed or trailer to transport

    Price: 4.00 Hour: $36.00 Daily: $48.00 Weekly: $144.00

    Link: DRAG / HARROW

  • BACKHOE, LOADER

    This 20hp gas backhoe is great for all your earthmoving and excavating needs. The excavating bucket is 16" wide. -48" front end loader with 1500# lift capacity -Backhoe will dig a maximum of 8'4" deep and reach out up to 10'9" -Unit weighs 3100lbs Dimensions 48"wide, 84"high, 13' long -Trailer rental is available at additional fee -Eq. Rents trailers weigh approximately 2500 lb & require a 2 5/16" receiver type ball hitch.

    Link: BACKHOE, LOADER

  • EXCAVATOR, COMPACT

    This 10hp compact mini excavator works well in tight areas and can fit through most standard fence openings. -Diesel powered unit with maximum digging depth of 5'6" -Unit weighs 2100 lbs and is adjustable in width from 28" - 34" -Unit is 9' long X 7'4" high (6' high with the rops down). -10" wide and 16" wide buckets available. These are shallow buckets. -Rate does not include a trailer, trailers are available at an additional charge. -Eq. Rents trailers require a 2" ball hitch -Exhaust Scrubber available upon request(subject to availability)

    Link: EXCAVATOR, COMPACT

  • EXCAVATOR, MINI

    -27.5 hp unit. Maximum digging depth is 9'9" deep. -Maximum reach of 16' -Units weighs 6300 lbs. is 5' wide X 15' long X 8' high -Have 12", 18", and 24" buckets available -Requires a fullsize truck and trailer to transport. Trailers are available at an additional charge. -Eq. Rents trailer weighs approximately 2500 lb & requires a 2 5/16" receiver type ball hitch

    Link: EXCAVATOR, MINI

  • MINI EXCAVATOR THUMB

    Hydraulic thumb attachment for mini excavators Used for picking items up with bucket ie: rocks, timbers etc..

    Link: MINI EXCAVATOR THUMB

  • COMPACTOR PAVER PAD

    The paver pad fits on Wacker WP1550 plates only -rate is discounted 50% when rented with Eq. Rents. compactors.

    Link: COMPACTOR PAVER PAD

  • COMPACTOR, JUMPING JACK

    This unit is used for compacting smaller areas. -Most often used when compacting in trenching -Shoe size = 11" x 13"

    Price: 4.00 Hour: $54.00 Daily: $74.00 Weekly: $222.00

    Link: COMPACTOR, JUMPING JACK

  • COMPACTOR, PAD REV. PLATE

    Pad fits only Wacker BPU2540 compactor -rate is discounted 50% when rented with our compactor

    Link: COMPACTOR, PAD REV. PLATE

  • COMPACTOR, PLATE

    Large plate compactor for work over sand and traffic bond as well as over pavers with the addition of the paver pad. These 200lb. compactors will compact roughly 12" in three passes and have a 18" x 22" plate. -Small unit is available at roughly half the weight with a 12" to 14" wide plate -Pad available for select units at additional charge for compacting over pavers

    Price: 4.00 Hour: $36.00 Daily: $56.00 Weekly: $168.00

    Link: COMPACTOR, PLATE

  • COMPACTOR, PLATE REVERSIBLE

    Reversible plate compactor to use on those large paver jobs, or excellent for compacting sand & traffic bond. Unit weighs approx. 310 lbs and compacts up to 16in. Plate size = 20" x 14" Unit set up with wheel kit for easy moving around job site. Paver pad available at an additional cost to compact paver bricks.

    Price: 4.00 Hour: $66.00 Daily: $88.00 Weekly: $264.00

    Link: COMPACTOR, PLATE REVERSIBLE

  • ROLLER, VIBRATORY RIDE ON

    Ride on roller used for compacting larger areas Used for compacting asphalt, traffic bond, gravel & more Unit weighs 2100# empty. Water can be added for more weight and also used to clean the drum Dimensions of the unit are 83" L x 40" W x 87" H Trailer required for transport, trailers available at an additional charge

    Link: ROLLER, VIBRATORY RIDE ON

  • TAMPER, HAND 8" SQUARE

    Manual Hand tamper for compacting soils for small jobs

    Link: TAMPER, HAND 8" SQUARE

  • 30# AIR CHIPPER

    Handheld air hammer for chipping into walls. Much lighter than a 90# air hammer and only requires 30 CFM at 100 PSI. -Can be run off Eq. Rents 185CFM compressor at additional charge. -Chipping hammer is discounted when rented w/Eq. Rents compressor

    Price: 4.00 Hour: $36.00 Daily: $44.00 Weekly: $132.00

    Link: 30# AIR CHIPPER

  • 60# AIR HAMMER

    Large 60 lb. air hammer for your large demolition projects. -Hammer requires roughly 75cfm to operate -Will operate with our 185 compressor which is an additional charge -Hammer price is discounted when rented with Eq. Rents. compressor.

    Link: 60# AIR HAMMER

  • 90# AIR HAMMER

    Large 90lb. air hammer for your large demolition projects. -Hammer requires roughly 75cfm to operate -Will operate with our 185 compressor which is an additional charge -Hammer is discounted when rented with Eq. Rents. Compressor

    Link: 90# AIR HAMMER

  • BRICK SAW, DRY CUT ELECTRIC

    An electric table brick saw. Meant for cutting pavers, bricks, and retaining wall block to give a nice clean cut. -Require a 15amp outlet and the saw weighs 65lbs. -Will cut 5" deep with a 14" blade -Only cuts dry, best used in a outdoor environment as it generates a lot of dust. -Blade is a additional charge

    Price: 4.00 Hour: $30.00 Daily: $46.00 Weekly: $138.00

    Link: BRICK SAW, DRY CUT ELECTRIC

  • BRICK SAW, WET CUT GAS POWERED

    This is a large gas powered brick and block saw with a cutting table. Unit has a water hookup which is recommended for use to keep blade cool and dust down. -5.5hp gas motor -Diamond blade rental is an additional charge -Saw weighs 210 lbs and will require a large vehicle (Truck, Van, or Trailer) to haul -Stand available at no additional charge Manufacturer: DIAMOND PRODUCTS Model: CC500M

    Price: 4.00 Hour: $36.00 Daily: $52.00 Weekly: $156.00

    Link: BRICK SAW, WET CUT GAS POWERED

  • BULLFLOAT WITH HANDLES

    Standard bullfloat with 3 handles included. -floats are 42" or 48" -handles are 5' or 6'

    Link: BULLFLOAT WITH HANDLES

  • CONC. GRINDER, SGL HEAD

    The concrete grinder can be used for removing high spots in a floor or also works well to remove paint, epoxies, and mastics. This machine will help prep a floor for a fresh epoxy coat and leaves a smooth finish to the concrete. -2 styles of cutting heads. Depending on application -Dyma serts for smoothing rough finishes, and removing epoxies and mastics -Strip serts to clean up floor, remove paint, mastics, tar, resins, etc. -Not suited for leveling uneven surfaces - machine will only do 1/32" per pass -ONE SET ONLY INCLUDED IN RENTAL PRICE -11" working width will grind up to 200 sq. ft. per hour while removing 1/32" -This is a electric unit requiring 110 volt/20amp service -Can use a vacuum hookup or water attachment to help keep dust down -Eq Rents has vacuums for an additional charge -Unit is 41" long, 24" wide, 38" high and weighs roughly 160 lbs. ClickHerefor additional specs. Manufacturer: EDCO

    Price: 4.00 Hour: $96.00 Daily: $108.00 Weekly: $378.00

    Link: CONC. GRINDER, SGL HEAD

  • CONC. GRINDER, TWO HEAD

    The concrete grinder can be used for removing high spots in a floor or also works well to remove paint, epoxies, and mastics. This machine will help prep a floor for a fresh epoxy coat and leaves a smooth finish to the concrete. -Multiple styles of cutting heads. Depending on application -ONE SET ONLY INCLUDED IN RENTAL PRICE -22 working width will grind approximately 400-500 sq.ft. per hour at 1/32 -This is a electric unit requiring 110 volt/20amp service -Can use a vacuum hookup or water attachment to help keep dust down -Eq Rents has vacuums for an additional charge -Unit is 55" long, 26" wide, 42" high and weighs roughly 260 lbs. **Truck, van without seats or trailer needed to transport

    Price: 4.00 Hour: $140.00 Daily: $180.00 Weekly: $630.00

    Link: CONC. GRINDER, TWO HEAD

  • CONC. PLANER, CARBIDE KIT

    Carbide teeth for our concrete planer. Works well for concrete or asphalt, but will leave a smooth to medium surface. -Best used to re-align high spots on sidewalks, garage floors, etc.

    Link: CONC. PLANER, CARBIDE KIT

  • CONCRETE BROOM W/HANDLE

    3' wide bristle broom for texturing concrete. -uses same handles as bullfloat

    Link: CONCRETE BROOM W/HANDLE

  • CONCRETE BUGGY, 16 CU FT

    Larger power buggy for moving material around a job site. -Buggy is 10'long, 4' wide, and weighs 1440 lbs. -Will hold up to 16 cubic feet of material in a hydraulic dump box -Self propelled -Unit is limited on climbing a grade. -Requires a trailer for transport with drop gate or tilt bed. -Eq Rents trailers available at additional charge w/2" ball required

    Price: 4.00 Hour: $72.00 Daily: $96.00 Weekly: $288.00

    Link: CONCRETE BUGGY, 16 CU FT

  • CONCRETE EDGER WALK BEHIND

    Concrete edger used to make the round edges on concrete. Has a 5ft. 4in. handle.

    Link: CONCRETE EDGER WALK BEHIND

  • CONCRETE EDGER, HAND TYPE

    Link: CONCRETE EDGER, HAND TYPE

  • CONCRETE GRINDER, HANDHELD

    Handheld concrete grinder with vacuum hook up -Rate includes the diamond grinding cup -Works well for grinding down small areas of concrete -Rate does not include vacuum -Customer will need a vacuum with a bag for most effective dust collection -Eq Rents has vacuums for an additional charge

    Price: 4.00 Hour: $38.00 Daily: $50.00 Weekly: $150.00

    Link: CONCRETE GRINDER, HANDHELD

  • CONCRETE GROOVER WALK BEHIND

    This is a walk behind concrete groover with a 5ft. 4in. handle

    Link: CONCRETE GROOVER WALK BEHIND

  • CONCRETE GROOVER, HAND TYPE

    Link: CONCRETE GROOVER, HAND TYPE

  • CONCRETE MAGNESIUM FLOAT

    Link: CONCRETE MAGNESIUM FLOAT

  • CONCRETE MIXER, 7CUFT

    Towable 7 cu. ft. concrete mixer. -Requires a 2" ball -Gas powered

    Price: 4.00 Hour: $36.00 Daily: $46.00 Weekly: $138.00

    Link: CONCRETE MIXER, 7CUFT

  • CONCRETE PLANER, BEAM FLAILS

    This cutting head is for use with rental of our concrete planer. The beam flails work great at removing carpet and tile adhesive as well as paint and caked oil from floors and concrete. -Does not leave a smooth finish to the floor, but grooves

    Link: CONCRETE PLANER, BEAM FLAILS

  • CONCRETE TROWELS, HAND TYPE

    Link: CONCRETE TROWELS, HAND TYPE

  • CONCRETE VIBRATOR

    Large concrete vibrator for deep concrete pours like a wall, stoop, or footings. -Vibrator is 1.6875" in diameter and is 10' in length -Electric vibrator

    Price: 4.00 Hour: $38.00 Daily: $50.00 Weekly: $150.00

    Link: CONCRETE VIBRATOR

  • DIAMOND BLADE RENT 12 & 14"

    Link: DIAMOND BLADE RENT 12 & 14"

  • DIAMOND BLADE RENT 16"

    MAXIMUM CUTTING DEPTH OF 6" FOR USE ON LARGE WALK BEHIND SAW ONLY!

    Link: DIAMOND BLADE RENT 16"

  • DYMA-SERT SET

    These bits are used on our concrete floor grinder. -Used for smoothing rough finishes, and removing epoxies and mastics -Not suited for leveling uneven surfaces - machine will only do 1/32" per pass

    Price: 4.00 Hour: $60.00 Daily: $60.00 Weekly: $210.00

    Link: DYMA-SERT SET

  • HAMMER, 60# ELECTRIC

    -This electric hammer works well for indoor demolition jobs as well as those outdoor projects where you need some added flexibility. -Meant to break through concrete 4" thick or less -Includes point, chisel & wide chisel. Clay spades & asphalt wedges also available depending on your particular application. -Requires 20 amps at 115volts. -50' Heavy duty extension cord provided. (do not run additional cord) -Operating weight approx. 65 lbs.

    Price: 4.00 Hour: $48.00 Daily: $70.00 Weekly: $210.00

    Link: HAMMER, 60# ELECTRIC

  • MIXER, ELECTRIC 2 CU. FT.

    Small two cubic ft. electric concrete mixer. Works well for small concrete pours, mortar, and plaster. -Can be used on a stand or as a wheelbarrow mixer -Lightweight and portable

    Link: MIXER, ELECTRIC 2 CU. FT.

  • MIXER, GAS MORTAR

    A towable gas powered mortar mixer. Has a 7 cu. ft. (roughly large enough for 2 bags) mortar mixing drum. -Requires a 2" trailer ball to transport.

    Price: 4.00 Hour: $36.00 Daily: $46.00 Weekly: $138.00

    Link: MIXER, GAS MORTAR

  • PLANER, CONCRETE

    Manufacturer: GENERAL EQUIP. Model: SP8 A rough cut concrete planer that will remove up to 1/8" of concrete at 8" wide per pass. This machine works great to level concrete or remove old surfaces as well. -Charge is for the unit, cutting heads are an additonal charge -Requires different heads and configurations depending on application. Clickhere for additonal specs.

    Price: 4.00 Hour: $68.00 Daily: $88.00 Weekly: $264.00

    Link: PLANER, CONCRETE

  • POWER SCREED

    Gas powered unit uses 2" x 6" or 2" x 8" boards. -Customer will supply boards -Maximum width of 30'

    Price: 4.00 Hour: $46.00 Daily: $60.00 Weekly: $180.00

    Link: POWER SCREED

  • POWER TROWEL, 36" WACKER

    Unit is set up with combination float/finish blades -36" diameter

    Price: 4.00 Hour: $40.00 Daily: $54.00 Weekly: $162.00

    Link: POWER TROWEL, 36" WACKER

  • SAW, 14" HAND HELD GAS

    Gas powered handheld concrete saw for all your cutting needs. Will cut a maximum of 5" deep with the 14" blade attached. Has a water hookup to help prolong the life of the blade as well as cut down on dust from the cut. -Price does not include diamond blade rental -Gas/oil mix sent along with saw

    Price: 4.00 Hour: $36.00 Daily: $48.00 Weekly: $144.00

    Link: SAW, 14" HAND HELD GAS

  • SAW, ELECTRIC CONCRETE W/ VAC ATTACH

    DIAMOND BLADE IS ADDITIONAL CHARGE CAN BE USED WITH SHOP VAC FOR REDUCED DUST SHOP VAC RENTAL ADDITIONAL CHARGE 20 AMP ELECTRICAL REQUIRED - USE ONLY CORD PROVIDED MAX CUTTING DEPTH APPROX 4 1/2"

    Price: 4.00 Hour: $42.00 Daily: $60.00 Weekly: $180.00

    Link: SAW, ELECTRIC CONCRETE W/ VAC ATTACH

  • SAW, ELECTRIC HAND HELD

    A handheld electric concrete saw. For your smaller jobs and indoor concrete work. -Max cutting depth is 3.5" -Require a 20 amp circuit to run off of and use minimal cord length -Takes a 12" blade at an additional charge -Dry cut only, no vacuum attachment

    Price: 4.00 Hour: $32.00 Daily: $46.00 Weekly: $138.00

    Link: SAW, ELECTRIC HAND HELD

  • SAW, GAS DIAMOND CHAIN

    This gas powered diamond chainsaw works great for cutting in windows and doors through a concrete wall. Can also be used for almost any concrete cutting application. This chainsaw will cut up to 12" deep and requires a water source to keep cut clean and ensure blade life. -Unit weighs 21lbs is 18" long, 11.5" high, and 10" wide -DIAMOND CHAIN IS NOT PART OF THE RENTAL - SOLD SEPARATELY -Will cut through concrete with rebar and handle brick and block -Gas/oil mix sent with saw Clickherefor additonal specs

    Link: SAW, GAS DIAMOND CHAIN

  • SAW, SOFF-CUT

    Early entry saw for cutting green concrete. Rental rate does not include blade or skid plate, these are available for an additional charge

    Link: SAW, SOFF-CUT

  • SAW, WALK BEHIND

    A large walk behind concrete saw that can cut through both concrete or asphalt. Our larger saws will cut up to 6" deep with a 16" blade or if you are cutting expansion joints try our smaller walk behind saw. -Blade rental is a additional charge, please let us know what surface you are cutting beforehand -Small units weigh 115 lbs. , Large units weigh 220 lbs. -Both units require a large vehicle or trailer for transport -Can cut dry or wet with the water connection -Water tank also available on large units.

    Price: 4.00 Hour: $50.00 Daily: $66.00 Weekly: $198.00

    Link: SAW, WALK BEHIND

  • SCREED, BAR 6'

    For use on our speed screed

    Link: SCREED, BAR 6'

  • SCREED, FLOAT PAN 8'

    8' float pan used for our speed screed.

    Link: SCREED, FLOAT PAN 8'

  • SCREED, SPEED SCREED SOL0

    One man operation sometimes referred to as weedeater style unit -Lightweight -Screed bars and strike off bars are not included in price -6' and 12' screed bars, 8' float pans available

    Price: 4.00 Hour: $46.00 Daily: $60.00 Weekly: $180.00

    Link: SCREED, SPEED SCREED SOL0

  • SCREED, STRIKE OFF BAR 12'

    Used on our speed screed for striking off concrete

    Link: SCREED, STRIKE OFF BAR 12'

  • STRIPPER, CERAMIC/HARDWOOD

    RIP-R-STRIPPER is a highly productive solution for removing ceramic tile, hardwood flooring materials and other covering removal applications for both commercial and DIY projects. A direct, impulse type blow force is provided by a wide range of 35 lbs weight class -An impulse blow is required to break through the high bond strengths provided by today's mastics, glues and thin set materials. The unique design configuration allows the operator to work in a more productive, upright position and significantly addresses jobsite exposure to knee and lower back related concerns -Not Recommended for use on wood sub floors

    Price: 4.00 Hour: $64.00 Daily: $92.00 Weekly: $276.00

    Link: STRIPPER, CERAMIC/HARDWOOD

  • STRIP-SERT SET

    Used to clean up floor, remove paint, mastics, tar, resins, etc. Not suited for removal of uneven concrete

    Price: 4.00 Hour: $60.00 Daily: $60.00 Weekly: $210.00

    Link: STRIP-SERT SET

  • STRIP-SERT SET

    Used to clean up floor, remove paint, mastics, tar, resins, etc. Not suited for removal of uneven concrete

    Price: 4.00 Hour: $60.00 Daily: $60.00 Weekly: $210.00

    Link: STRIP-SERT SET

  • ALUMINUM SIDING BREAK, 10'

    This 10ft. aluminum siding break can handle soft aluminum (.030) hard aluminum (.022) in addition to 29 gauge steel and all vinyl sidings

    Link: ALUMINUM SIDING BREAK, 10'

  • BOLT CUTTER, 30"

    Link: BOLT CUTTER, 30"

  • BRICK/WALL SPLITTER

    A manual brick and block splitter that works well for splitting retaining wall block and paver stones. -Will create a split face appearance on block -Unit weighs 100lbs. -Cutting length is 17inches, cutting height 3/8" up to 12"

    Price: 4.00 Hour: $30.00 Daily: $38.00 Weekly: $114.00

    Link: BRICK/WALL SPLITTER

  • INSULATION VACUUM

    This unit is a vacuum for removing insulation in attics. Material can be disposed into enclosed dumpster or bags are available for an additional cost. Includes up to 150' of pickup hose. -will need truck and trailer to transport unit and hose

    Link: INSULATION VACUUM

  • MAGNET, 30"

    Large 30" push magnet works well for cleaning up a job site and removing nails and other metallic debris from the ground.

    Link: MAGNET, 30"

  • MEASURING TAPE, 200'

    HAND HELD UNIT MEASURES FEET AND INCHES UP TO 200'

    Price: 4.00 Hour: $6.00 Daily: $10.00 Weekly: $25.00

    Link: MEASURING TAPE, 200'

  • MEASURING WHEEL

    UNIT MEASURES INCHES AND FEET UP TO 1000'

    Price: 4.00 Hour: $6.00 Daily: $10.00 Weekly: $25.00

    Link: MEASURING WHEEL

  • METAL DETECTOR

    The metal detector is most commonly used to find survey markers in a lawn as well as the occasional weekend treasure hunting. -Will not work in water -Can detect metallic objects down to 8" deep at its highest setting depending on object size

    Price: 4.00 Hour: $16.00 Daily: $22.00 Weekly: $66.00

    Link: METAL DETECTOR

  • MITRE SAW, POWER 10"

    For mitre cuts on moldings and trim -includes blade

    Price: 4.00 Hour: $18.00 Daily: $26.00 Weekly: $78.00

    Link: MITRE SAW, POWER 10"

  • MITRE, POWER SLIDING

    For mitre cuts on moldings and trim -sliding/compound style unit -will cut a 2" x 12" board straight or a 2" x 8" board at a 45 degree -blade is 8 1/2"

    Price: 4.00 Hour: $24.00 Daily: $36.00 Weekly: $108.00

    Link: MITRE, POWER SLIDING

  • PIPE LOCATOR

    The pipe locator can detect ferrous metal pipes up to 4 to 6ft. below the surface.

    Price: 4.00 Hour: $28.00 Daily: $36.00 Weekly: $108.00

    Link: PIPE LOCATOR

  • POST DRIVER, GAS

    UNIT WEIGHS 44LBS 1720 BLOWS PER MINUTE GREAT FOR DRIVING T-POSTS, GROUND RODS, FORM PINS, AND PIPE UP TO 2 3/8' CAN BE ADAPTED FOR TENT STAKES AND U CHANNEL POSTS ****LIMITED AVAILABILITY JUNE THRU SEPTEMBER***

    Price: 4.00 Hour: $52.00 Daily: $78.00 Weekly: $234.00

    Link: POST DRIVER, GAS

  • PROPANE TANK RENTAL, 100#

    Link: PROPANE TANK RENTAL, 100#

  • PROPANE TANK RENTAL, 20#

    Link: PROPANE TANK RENTAL, 20#

  • PROPANE TANK RENTAL, 40#

    Link: PROPANE TANK RENTAL, 40#

  • PROPANE TORCH

    WILL RUN OFF OF A 20# TANK FOR 1-2 HOURS OR ANY LARGER TANK WE RENT 20# TANKS FOR THE TORCH, PROPANE AND PROPANE TANK ARE AN EXTRA CHARGE IF NEEDED.

    Link: PROPANE TORCH

  • ROOF SHOVEL, TEAR OFF SHOVEL

    USED FOR REMOVING SHINGLES OFF OF A ROOF

    Link: ROOF SHOVEL, TEAR OFF SHOVEL

  • ROOFING SNOW RAKE/SHOVEL

    USED FOR SHOVELING SNOW OFF OF ROOFS THREE 5' HANDLES

    Link: ROOFING SNOW RAKE/SHOVEL

  • SANDBLASTER, 200#

    Trying to clean paint off of a old trailer or need to get a large area of paint removed? This sandblaster is great for your large jobs. -Require 70 CFM @90 PSI which will work off of our 185CFM compressor -Works best in dry weather to avoid clumping or clogging sand -Eq. Rents does not stock sand, but can usually be purchased at most hardware or big box stores -Generates a lot of dust and a blasting shield and long clothes are recommended, use in a well ventilated area -250-300lbs. of sand per hour depending on the nozzle size.

    Price: 4.00 Hour: $50.00 Daily: $72.00 Weekly: $216.00

    Link: SANDBLASTER, 200#

  • SANDBLASTER, 25#

    This sandblaster is recommended for small jobs only -Sandblaster requires 15CFM @ 80 PSI which our 8hp compressor can provide at an additional charge -Operates best in dry weather/climate -Can only use a 1/8" nozzle on this unit -Sand can be purchased at most hardware stores and is not included in rental

    Price: 4.00 Hour: $30.00 Daily: $40.00 Weekly: $120.00

    Link: SANDBLASTER, 25#

  • SHINGLE HOG, AIR POWERED

    Air powered tool for removing shingles off a roof. -Requires 4.1 CFM @ 100 PSI, 2hp compressor or larger -Includes 2 different sized tooth bars, narrow one for multiple layers, wide one for single layer

    Link: SHINGLE HOG, AIR POWERED

  • TRANSIT WITH TRIPOD & ROD

    Used for shooting grade. -included tripod and rod

    Price: 4.00 Hour: $22.00 Daily: $30.00 Weekly: $90.00

    Link: TRANSIT WITH TRIPOD & ROD

  • TRANSIT, LASER

    A self leveling laser transit for grading and leveling needs. -Good for exterior use as well as interior use for suspended ceilings or other applications. -Rate includes tripod and rod -Attachments are available for suspended ceilings.

    Price: 4.00 Hour: $32.00 Daily: $46.00 Weekly: $138.00

    Link: TRANSIT, LASER

  • DRYWALL LIFT-SHORT

    Our short mast drywall lift can help you hang drywall up to 11ft. high. -Will handle lifting up to 150 lbs. -Unit breaks down into 3 pieces for transportation -Sheet holder dimensions; collapsed 3' x 4' / extended max. 3' x 9'6" -Will handle 4' x 14' sheets Manufacturer: TEL-PRO

    Link: DRYWALL LIFT-SHORT

  • DRYWALL LIFT-TALL

    Our tall mast drywall lift will help hang drywall on a ceiling up to 15 ft. high. -Can lift up to a 150lb sheet of drywall -Unit breaks down into three pieces for transport. -Sheet holder dimensions; collapsed 3' x 4' / extended max. 3' x 9'6" -Will handle up to 4' x 14' sheets

    Link: DRYWALL LIFT-TALL

  • DRYWALL SANDER

    A drywall sander to help even out and hide joints. Will work on light removal but cannot be used for large buildup of plaster or joint compound. -Can work for light paint removal -Sandpaper is available in 80, 100, 120, and 150 grit at a additional charge -Also sell the foam pad that the sanding pads adhere to. -Sander and vacuum are rented seperately

    Link: DRYWALL SANDER

  • BRUSH, AGGRESIVE 7 3/4"

    Link: BRUSH, AGGRESIVE 7 3/4"

  • BRUSH, LIGHT DUTY 7 3/4"

    Link: BRUSH, LIGHT DUTY 7 3/4"

  • BRUSH, SOFT 7 3/4"

    Link: BRUSH, SOFT 7 3/4"

  • BURNISHER, 20", 1600RPM

    A high speed burnisher for polishing a wax coated floor. 1600 RPM -This unit is not meant to be a floor scrubber. -Creates a high gloss wet look -Not all finishes can be burnished. Check your product to see if it can be burnished. -Pads are sold seperately

    Price: 4.00 Hour: $28.00 Daily: $36.00 Weekly: $108.00

    Link: BURNISHER, 20", 1600RPM

  • CARPET CLEANER, HOST DRY

    Host dry carpet cleaner. Works well for light duty carpet cleaning or surface stains. -Cleaning powder is available at an additional charge -Customer will need their own vacuum cleaner to vacuum host product after dry. If bag style vacuum - put in new bag before vacuuming up product. -If carpet is heavily soiled, recommend looking at our wet carpet extractor

    Link: CARPET CLEANER, HOST DRY

  • CARPET CLEANER, SILVER STAR

    Portable carpet cleaner for wet cleaning carpets. Carpet cleaner has a 3 gallon capacity and can hold hot or cold water. (does not self heat water) -Weighs approximately 40lbs. -Upholstery attachment is available with unit for stairs and furniture -Powerful vacuum also works when vacuuming carpet after flooding issue. -Cleaning solution is available in quarts, half gallons and gallons for an additional charge

    Price: 4.00 Hour: $20.00 Daily: $28.00 Weekly: $84.00

    Link: CARPET CLEANER, SILVER STAR

  • CARPET KNEE KICKER

    Kicker used to stretch small segments of carpeting. For a large room use the carpet stretcher.

    Link: CARPET KNEE KICKER

  • CARPET SEAMING IRON

    Used to heat up seaming tape to glue down carpet seams -Seaming tape is sold by the foot or roll (roll is 22 yards)

    Price: 4.00 Hour: $10.00 Daily: $15.00 Weekly: $45.00

    Link: CARPET SEAMING IRON

  • CARPET STAIR/TUCK TOOL

    Link: CARPET STAIR/TUCK TOOL

  • CARPET STRETCHER

    Used to stretch out new carpet in a large room. -May need to consider a knee kicker for small areas and/or closets -We also rent seaming irons and tuck tools, if needed

    Price: 4.00 Hour: $18.00 Daily: $26.00 Weekly: $78.00

    Link: CARPET STRETCHER

  • CARPET TRIMMER

    Tool designed to trim up excess carpet as it is laid out.

    Link: CARPET TRIMMER

  • CARPET TRIMMER

    Tool designed to trim up excess carpet as it is laid out.

    Link: CARPET TRIMMER

  • CERAMIC TILE CUTTER

    The manual ceramic tile cutter will cut both ceramic and quarry tile. If you have a lot of tile to cut or a large tile to cut the ceramic saw may be a better option. -Maximum tile would be 12" square. Not suited for diagonal cutting. -This cutter uses the score then break method for cutting tiles -Suggest using gloves when cutting/breaking with cutter

    Link: CERAMIC TILE CUTTER

  • CERAMIC TILE SAW, 12" CUT

    Small electric ceramic saw that will handle cutting up to a 12" straight cut or a 10" diagonal cut. -Unit requires water to operate

    Price: 4.00 Hour: $24.00 Daily: $36.00 Weekly: $108.00

    Link: CERAMIC TILE SAW, 12" CUT

  • CERAMIC TILE SAW, 18" CUT

    Electric ceramic tile saw for large tile jobs or for a nice clean cut on larger tiles. Requires water during operation and will cut up to a 18" x 18" tile or a 12" tile diagonally. -Weighs roughly 110lbs -Stand is included at no additional charge

    Price: 4.00 Hour: $32.00 Daily: $45.00 Weekly: $135.00

    Link: CERAMIC TILE SAW, 18" CUT

  • CERAMIC TILE SAW, 24" CUT

    Electric powered large ceramic tile saw -Will handle straight cuts up to 24", diagonal cuts up to 18" -Telescoping table w/stainless steel rail glides -Stand available at no additional charge -Water must be used with unit

    Price: 4.00 Hour: $34.00 Daily: $48.00 Weekly: $144.00

    Link: CERAMIC TILE SAW, 24" CUT

  • DEHUMIDIFIER, COMMERCIAL

    This is a commercial type dehumidifier. -Removes up to 15 gallons per day -Electronic touch pad control -40' Drain hose, 25' power cord -3M Hi air flow filter -Dimensions = 19 1/2"W x 32"H x 20"D, Weighs 80 lbs.

    Link: DEHUMIDIFIER, COMMERCIAL

  • FLOOR EDGER, SR7, CLARKE

    Edge sander for wood floors. This edger works well in conjuction with a drum sander. Will sand the edges around room that drum sander cannot leaving only the extreme corners to hand sand. Also works to sand down seams on sub floor. -Send 10 sheets of four grits (20, 36, 60, and 100) -Only charged for used sand paper and return the remaining -Unit has a dust collection bag. Dust should be emptied often and always stored empty.

    Price: 4.00 Hour: $18.00 Daily: $26.00 Weekly: $78.00

    Link: FLOOR EDGER, SR7, CLARKE

  • FLOOR SANDER, DRUM

    The drum sander is ideal for refinishing hardwood floors or outdoor decks. -Send 10 sheets of 4 grits of sand paper (20, 36, 60, and 100) -Only charged for sand paper used, must return unused -Leaves 2" unsanded along sidewalls and 5" on endwalls -Use floor edger to complete areas the drum sander cannot reach -Use this unit in forward motion only with woodgrain. Always keep moving. -Unit has dust collection to minimize dust. Always store dust bag empty.

    Price: 4.00 Hour: $30.00 Daily: $42.00 Weekly: $126.00

    Link: FLOOR SANDER, DRUM

  • FLOOR SANDER, U-SAND

    This is a finish type sander for hardwood floors with a random orbit action. This sander is not aggresive enough for finish removal. -Unit can be used in any direction and can stay in one spot w/o harm -Unit will get close to walls -Sandpaper is additional charge. (send 20 of each grit 20, 36, 60, 100, 120) pay for only sandpaper used -Uses 4 discs per sanding (set of discs lasts approx. 15 - 20 minutes) -Unit weighs approx. 125 lbs. -20amp service required

    Price: 4.00 Hour: $36.00 Daily: $48.00 Weekly: $144.00

    Link: FLOOR SANDER, U-SAND

  • FLOOR SCRAPER, HAND TOOL

    Hand held scraper to remove gum, or excess on flooring

    Link: FLOOR SCRAPER, HAND TOOL

  • FLOOR SCRUBBER, 13"

    13" diameter, 175 RPM floor maintenance machine -Stripping, scrubbing and polishing pads available for additional fee -Slight upward or downward movement on handle operates left to right movement -Generally used for smaller applications and household use.

    Price: 4.00 Hour: $18.00 Daily: $22.00 Weekly: $66.00

    Link: FLOOR SCRUBBER, 13"

  • FLOOR SCRUBBER, 17"

    17" diameter floor maintenance machine -175 RPM -Stripping, scrubbing, polishing pads available for sale -Unit can also be used with sandpaper (sold seperately) to remove loose drywall splatters or loose paint from concrete -Tungsten carbide disc attachment also available for additional rental fee for removing paint, epoxy and tile/carpet adhesive -Slight upward/downward pressure on handles gives left to right movement

    Price: 4.00 Hour: $24.00 Daily: $30.00 Weekly: $90.00

    Link: FLOOR SCRUBBER, 17"

  • FLOOR STRIPPER, VINYL/CARPET

    Walk behind electric floor stripper. Like having a motorized putty knife on a larger scale -Used to remove vinyl tile, linoleum or rubberback carpet off of wood or concrete -Different size blades for different applications -One blade is included in rental price. Charge for additional blades used. -Units weigh approximately 140 lbs.

    Price: 4.00 Hour: $46.00 Daily: $58.00 Weekly: $174.00

    Link: FLOOR STRIPPER, VINYL/CARPET

  • FLOOR TILE CUTTER

    Manual floor tile cutter -for use on asphalt, vinyl or rubber tiles

    Link: FLOOR TILE CUTTER

  • GROUT CLEANING BRUSH

    Link: GROUT CLEANING BRUSH

  • LINOLEUM ROLLER

    Large 3 wheel weights to help press linoleum into place when you are glueing it down. -Offer a 75 lb. and 100 lb. unit

    Link: LINOLEUM ROLLER

  • MOTOR SCRUBBER, 7 3/4"

    Battery powered scrubber used on variety of cleaning jobs. -Operator wears harness w/battery attached. -Use to clean grout on ceramic tile floors or a dirty tub/shower. -Lighweight and portable for all those hard to reach spots -Scrubbing pads are sold at an additional fee -Various brushes available at additional rental fee

    Price: 4.00 Hour: $18.00 Daily: $28.00 Weekly: $84.00

    Link: MOTOR SCRUBBER, 7 3/4"

  • SANDER, RADIATOR

    Designed for sanding under radiators and toe kicks on counters. -Uses a 5" diameter adhesive backed disc -Sandpaper is sold at additional charge (20, 40, 80 & 100 grit discs) -Remove sandpaper from unit when still warm

    Price: 4.00 Hour: $20.00 Daily: $28.00 Weekly: $84.00

    Link: SANDER, RADIATOR

  • SAW, TOE KICK

    Used for cutting underlayment under counters, etc -uses 3 1/2" blade, included

    Price: 4.00 Hour: $22.00 Daily: $28.00 Weekly: $84.00

    Link: SAW, TOE KICK

  • SHOP VAC

    Unit can be set up for wet or dry vacuuming. -8 gallon capacity -Includes hose and floor or hand tools -Bags available for additional charge.

    Link: SHOP VAC

  • STAPLER, CARPET

    Electric powered carpet stapler. Will shoot 9/16" long x 3/16" crown staples. -Staples are an additional charge

    Price: 4.00 Hour: $10.00 Daily: $15.00 Weekly: $45.00

    Link: STAPLER, CARPET

  • STAPLER, ELECTRIC

    GENERAL PURPOSE STAPLER. STAPLES ARE ADDITIONAL COST.

    Price: 4.00 Hour: $10.00 Daily: $15.00 Weekly: $45.00

    Link: STAPLER, ELECTRIC

  • STAPLER, UNDERLAYMENT

    This is a manual stapler using a mallet to drive staples -Eq Rents sell 7/8" and 1 1/8" staples for this unit

    Link: STAPLER, UNDERLAYMENT

  • TUNGSTEN CARBIDE 17" DISC

    USED ON 17" FLOOR SCRUBBING MACHINE REMOVES PAINT, EPOXY, URETHANE WAX, TILE/CARPET ADHESIVE FLOOR SCRUBBER RENTAL ADDITIONAL CHARGE

    Link: TUNGSTEN CARBIDE 17" DISC

  • TURBO DRYER, AIR MOVER

    Awesome floor dryer. Blows large volume of air across floor.

    Link: TURBO DRYER, AIR MOVER

  • WALLPAPER STEAMER

    Steam type wallpaper removal system. -Fill base unit w/hot tap water. Will heat up in approx. 20 minutes. -Full tank will last approx. 75 - 90 minutes -If paper is difficult to remove - score with a utility knife or perforator -Unit comes with 2 size pans -Rubber gloves are recommended. -Paint tray, bucket or pan needed to place steam pan in when not in use. -Do not store in freezing temperatures

    Price: 4.00 Hour: $18.00 Daily: $24.00 Weekly: $72.00

    Link: WALLPAPER STEAMER

  • 2" TRASH PUMP, GAS DRIVEN

    Pumps up to 240 gallons per minute. Will handle some solids mixed in water -Includes 15' of suction hose and 100' of discharge hose -Unit needs to be primed to use -Do not store in freezing temperatures Manufacturer: WACKER Model: PT2A

    Price: 4.00 Hour: $36.00 Daily: $46.00 Weekly: $138.00

    Link: 2" TRASH PUMP, GAS DRIVEN

  • GENERATOR, 1000 WATT

    Small 1000watt generator great for tailgating or those functions which require a quiet generator. -Runs 1.5 - 2 hours per tank of fuel -Generates roughly 8 amps

    Price: 4.00 Hour: $18.00 Daily: $26.00 Weekly: $78.00

    Link: GENERATOR, 1000 WATT

  • GENERATOR, 2800 WATT

    Stationary 2400w generator -Will run 6-7 hours on one tank of fuel -Runs a 120v output @ 2300w

    Price: 4.00 Hour: $26.00 Daily: $34.00 Weekly: $102.00

    Link: GENERATOR, 2800 WATT

  • GENERATOR, 4000 WATT

    Gas powered 4100w generator. -Operates both a 120v output or a 240v output -Twist lock adapter available for 20 amp circuit -Runs 6-7 hours on full tank of fuel

    Price: 4.00 Hour: $30.00 Daily: $42.00 Weekly: $126.00

    Link: GENERATOR, 4000 WATT

  • GENERATOR, 6000 WATT

    Gas powered 5600w generator -Can handle a 120v output as well as a 240v output -Twist lock adapter available for rent for 20amp circuit -Runs 4-5 hours on a full tank of fuel

    Price: 4.00 Hour: $38.00 Daily: $50.00 Weekly: $150.00

    Link: GENERATOR, 6000 WATT

  • HOSE, 2" X 50' DISCHARGE

    2" discharge hose for a 2" trash pump.

    Link: HOSE, 2" X 50' DISCHARGE

  • HOSE, 3" X 50' DISCHARGE

    3" discharge hose for a three inch trash pump.

    Link: HOSE, 3" X 50' DISCHARGE

  • INVERTER, GENERATOR 2000W

    -2000 watts, 120V -Super quiet, great for camping -Easy to carry - less than 47 lbs -Fuel efficient - up to 9.6 hrs on 1 gal of gas -Inverter - stable power for computers and more Unit Dimensions- 20.1" L x 11.4" W x 16.7" H

    Price: 4.00 Hour: $28.00 Daily: $40.00 Weekly: $120.00

    Link: INVERTER, GENERATOR 2000W

  • PUMP, 2" ELECTRIC SUBMERSIBLE

    2" electric submersible pump. Designed to pump fairly clean water, for sewage backup or dirty water removal look at renting the 2" trash pump. -Pumps 60 gallons per minute -Maximum of 50ft. of discharge hose included in rental

    Price: 4.00 Hour: $24.00 Daily: $32.00 Weekly: $96.00

    Link: PUMP, 2" ELECTRIC SUBMERSIBLE

  • PUMP, 3" TRASH, GAS DRIVEN

    -Will pump solids up to 1 1/8" -Pumps up to 400 gallons per minute -Includes 20' suction hose and 100' of discharge hose -Unit needs to be primed to use -Do not store in freezing temperatures

    Price: 4.00 Hour: $42.00 Daily: $58.00 Weekly: $174.00

    Link: PUMP, 3" TRASH, GAS DRIVEN

  • PUMP, SMALL SUBMERSIBLE

    -Customer will use garden hose for discharge -Pumps approximately 15 gallon per minute

    Link: PUMP, SMALL SUBMERSIBLE

  • PUMP, WATERBED

    -Garden hose used for discharge -Needs waterbed fill adapter to use

    Link: PUMP, WATERBED

  • CERAMIC SCRAPING BIT, HAM DRILL

    USED WITH HAMMER DRILL TO CHIP OUT CERAMIC TILE

    Link: CERAMIC SCRAPING BIT, HAM DRILL

  • CORE BIT, 2" X 14"

    CAN BE USED WITH HANDHELD DRILL OR FLOOR STANDING UNIT

    Link: CORE BIT, 2" X 14"

  • CORE BIT, 3 1/2" X 14"

    CAN BE USED WITH HAND HELD DRILL OR FLOOR STANDING UNIT

    Link: CORE BIT, 3 1/2" X 14"

  • CORE BIT, 3" X 14"

    CAN BE USED HAND HELD DRILL OR FLOOR STANDING UNIT

    Link: CORE BIT, 3" X 14"

  • CORE BIT, 4 1/2" X 14"

    MUST BE USED AT CORRECT DRILL SPEED AND MUST USE WATER USED WITH UPRIGHT CORE DRILL

    Link: CORE BIT, 4 1/2" X 14"

  • CORE BIT, 4" X 14"

    CAN BE USED WITH HAND HELD DRILL OR FLOOR STANDING UNIT

    Link: CORE BIT, 4" X 14"

  • CORE BIT, 5 1/2" X 14"

    CAN BE USED WITH HAND HELD DRILL OR FLOOR STANDING UNIT

    Link: CORE BIT, 5 1/2" X 14"

  • CORE BIT, 5" X 14"

    CAN BE USED FLOOR STANDING UNIT ONLY MUST BE USED AT CORRECT DRILL SPEED AND MUST USE WATER

    Link: CORE BIT, 5" X 14"

  • CORE BIT, 6" X 14"

    CAN BE USED WITH FLOOR STANDING UNIT ONLY MUST BE USED AT CORRECT DRILL SPEED AND MUST USE WATER

    Link: CORE BIT, 6" X 14"

  • CORE DRILL, HANDHELD

    Handheld electric core drill for drilling into walls and thin floors. The drill can handle up to a 4" core bit or less. -Must use water with unit to keep bit cool -Diamond Core bits rent for a additional charge

    Price: 4.00 Hour: $34.00 Daily: $48.00 Weekly: $144.00

    Link: CORE DRILL, HANDHELD

  • CORE DRILLING MACHINE

    Electric floor core drilling machine with a vacuum seal. -Bits are a additional charge and vary in sizes offered from 2" up to 6" -Water is required -20amp service required. Thread size 1 1/4 x 7

    Price: 4.00 Hour: $46.00 Daily: $60.00 Weekly: $180.00

    Link: CORE DRILLING MACHINE

  • HAMMER DRILL CORE BIT 3" X 17"

    USED FOR DRILLING THRU BRICK OR BLOCK ONLY TO BE USED IN LARGER HAMMER DRILL ONLY

    Link: HAMMER DRILL CORE BIT 3" X 17"

  • HAMMER DRILL CORE BIT 4" X 17"

    USED FOR DRILLING THRU BRICK OR BLOCK ONLY TO BE USED IN LARGER HAMMER DRILL ONLY

    Link: HAMMER DRILL CORE BIT 4" X 17"

  • HAMMER DRILL, 1/2" - 1 1/4"

    Hammer drill that can handle drill bits 1/2" to 1 1/4" -Chipping bits also available -Drill bits, points and chisels are available at no additional charge

    Link: HAMMER DRILL, 1/2" - 1 1/4"

  • HAMMER DRILL, 3/4" - 2"

    - larger hammer drill that can handle drill bits from 3/4" to 2" bits - also accepts chipping bits to be used as a chipping hammer. -Bits and points and chisels available at no charge -3" and 4" brick and block core bits are available at an additional charge -Unit weighs 30 lbs. -LIMITED AVAILABILITY during tent season

    Price: 4.00 Hour: $34.00 Daily: $48.00 Weekly: $144.00

    Link: HAMMER DRILL, 3/4" - 2"

  • AIR COMPRESSOR, 185 CFM

    This towable 185 CFM compressor can handle just about all but the largest compressor needs. From sandblasting, to demolition with an air hammer, to blowing out water lines in fall this will take on all jobs. -Unit weighs 2500lbs. and requires a 2" ball for transport. -Runs up to 185CFM at 120 PSI -Rate includes 100' of hose -Additional hose and attachments available for a extra charge.

  • AIR COMPRESSOR, 8HP GAS

    The 8hp air compressor will deliver 15.3CFM at 100PSI. This compressor works best to provide air for our small sandblaster, nail guns, etc. -Comes with 100 ft. of air hose (more hose available for additional charge)

  • AIR COMPRESSOR,1.5HP

    Small 1.5hp compressor that is capable of running 4.1 CFM @ 100PSI. -Handles most nail guns, recharging wells, and small spray guns -Can handle 2 finish or 2 roofing nailers, but only 1 framing nailer May be slight delay while compressor catches up when running 2 guns

  • HOSE, 3/4" AIR

    UNIVERSAL ( CHICAGO ) TYPE FITTING USED WITH OUR 185 AIR COMPRESSORS

  • HOSE, 3/8" X 50' AIR

    1/4" FITTINGS ON HOSE USED WITH 1 1/2 HP ELECTRIC AIR COMPRESSOR, USED WITH 5HP GAS COMPRESSOR OR 8HP GAS COMPRESSOR

  • HEATER 80,000BTU FAN FORCED PR

    80,000 BTU propane heater -Requires electricity -Propane cylinder and fuel are not included in rental, available at an additional charge -Unit requires 100# propane cylinder to operate

  • HEATER, 100,000 BTU KEROSENE

    100,000 BTU kerosene/diesel heater -Requires electricity to run -Unit leaves with full tank of diesel fuel. Must be returned full of diesel fuel. -A full tank of fuel will run heater for roughly 9-11 hours

  • HEATER, 100,000BTU RADIANT PRO

    100,000 BTU radiant heater that requires no electricty to operate. -Works well for large ventilated areas and has no fan or blower -Uses propane to heat, tank rental and propane are additional charge -Works best with 100# propane cylinder

  • HEATER, 125,000 BTU TENT HEATER

    Large 125,000 BTU tent heater that is low emissions and can be placed inside of a tent or large structure. -Requires electricty to operate -Propane gas source required, tank rental available and propane usage are additional charge -Requires 100# propane cylinder to use. -Includes heavy duty extension cord

  • HEATER, 150,000 BTU PROPANE

    -150,000 BTU, REQUIRES - 100# PROPANE CYLINDER -REQUIRES ELECTRICITY -PROPANE CYLINDER AND FUEL ARE NOT INCLUDED IN RENTAL, AVALIBLE AT ADDITIONAL CHARGE.

  • HEATER, 170,000 BTU TENT, PROPANE

    170,000 BTU propane fueled tent heater. -Requires electricity to operate -Heater has a duct system to go under tenting sidewall or a narrow garage door. (keep heater outside or in well ventilated area) -Units weighs roughly 130 lbs. and is 31" x 18" x 28" -Contains thermostat controller -Requires large 100lb propane cylinder to operate, cylinder and propane available at additional charge

  • HEATER, 250,000BTU CONVECTION

    250,000 BTU propane heater. -No electricity required -Heater has a open flame and should be used in a open and monitored area -Price does not include propane- 100# propane cylinder and propane are available at additional charge

  • HEATER, 60,000 BTU TENT PROPANE

    60,000 BTU propane tent heater that is whisper quiet. -Requires electricity to run and has a electric thermostat -Propane tank and fuel not included in rental, available at additional charge -Unit runs off 20# propane cylinder

  • HEATER, 70,000 BTU KEROSENE

    55,000 BTU kerosene/diesel heater -Requires electricity -Will run 6-8 hours on a full tank of fuel -Unit leaves with full tank of diesel fuel. Must be returned full of diesel fue

  • HEATER, 80,000 BTU TENT HEATER, LP

    80,000 BTU propane tent heater. -Requires electricity to operate -Propane cylinder and fuel not included, both are available at additional charge -Requires 100# propane cylinder to operate -Heater comes with a diffuser that blows heat in under sidewall or a garage door to heat a structure or tent.

  • HEATER, PATIO

    Domed patio heater to radiate heat in a 10' - 20' diameter depending on weather. -Does not require electricity to run -Propane tank and fuel not included in rental, both available at additional charge -Unit is 86"H x 36" in diameter dome x 23" diameter base

  • HEATER,175,000 BTU KEROSENE

    175,000 BTU kerosene/diesel heater -Requires electricity to run -Unit leaves with full tank of diesel fuel. Must be returned full of diesel fuel. -A full tank of fuel will run heater for roughly 6-8 hours

  • LADDER, 12' FIBERGLASS STEP

    A 12ft. fiberglass step ladder has a maximum standing height of 10ft. -Approximate working height is 16' -Must provide your own means of transportation and tie downs for securing ladder -Footprint is 36" x 80"

  • LADDER, 14' FIBERGLASS STEP

    14' Fiberglass step ladder with a maximum standing height of 12'. -Approximate working height of 18'. -Must provide own tiedowns to secure ladder -Footprint is 39" x 105" -This ladder has ladder rungs on both sides

  • LADDER, 24' ALUMINUM EXTENSION

    A two piece 24' aluminum extension ladder. -Maximum working height is approximately 22' - 23'. -Max weight capacity of 300lbs. -Unit is 12' long for hauling -Must provide your own tie downs to secure for transport

  • LADDER, 8' STEP

    Eight foot aluminum step ladder. Maximum standing height is 6ft. and working height is approximately 12'. Footprint is 28" x 55" -Customer should bring their own tie downs to secure ladder

  • LADDER, LITTLE GIANT

    The incredible Little Giant Ladder. This ladder is 9' high with the Little Giant built in flexibility. Works well as a step or extension ladder, or can extend each set of legs incrementaly to work on stairs. -Maximum step ladder height is 9' -Maximum extension ladder height is 19'

  • LADDERS, 32' ALUMINUM EXTENSIO

    Two piece 32' aluminum extension ladder (16' for transport). -Maximum working height is 30'-31' -Maximum weight capacity is 300lbs. -Must provide own tie downs to secure for transport

  • LADDERS, 40' ALUMINUM EXTENSIO

    Two piece 40' aluminum extension ladder (20' transport length). -Maximum working height of 36'-38' -Maximum weight capacity of 300 lbs. -Must provide in tie downs to secure for transport

  • PLANK, 10' EXTENSION (WOOD)

    Extends from 6' - 10' x 12"wide. One man, 250# capacity

  • PLANK, 13' EXTENSION(ALUM.)

    14" WIDE, 250# 1-MAN CAPACITY -extends from 8' - 13'

  • PLANK, 20' ALUM STAGE

    14" WIDE x 20' LONG, 500# 2-MAN CAPACITY

  • AERATOR, WALK BEHIND

    Gas powered walk behind plug aerator. -Aerating width of 19" with a max depth of 3" -24 core style tines -Unit weighs 240 lbs w/o water added (SP units only) -Overall size = 57"L x 30"W x 52 1/2"W -Fold N' Go handle -Best used when ground is moist. -Best results when aerated in 2 directions

  • AERATOR, 32" TOWABLE

    A towable aerator with a drop pin for use behind a lawn tractor or ATV -2 concrete weights sent along with rental -125lb. maximum weight capacity -Best used while the ground is moist. -Best results when used in 2 directions. -Approximately 54 plugs per sq. yard at a maximum depth of 2.5 inches -Unit is 43" wide, 48" long, and 21" high, aerating width is 32"

  • BACKPACK BLOWER

    This blower is great for moving leaves and clearing patios and driveways. -Blower only, does not have suction -Unit includes a can of gas/oil mix

  • BCS, SWEEPER

    This power broom works well to get the stones out of your lawn after the winter thaw. Will also broom loose dry grass/thatch. -40" wide broom width attached to a 11hp drive unit -Walk behind self propelled with variable gears -Will not work well in a steep ditch/culvert. See 22" handheld powerbroom. -Weighs 230 lbs. -Requires a pickup truck or a vehicle with trailer to transport

  • BCS, TILLER BOX REAR TINED

    Walk behind gas powered rear tined tiller, 11hp -Tines are covered to help break up soil finer -Tilling width is 22", approx. weight = 250 lbs. -Will need truck or trailer to transport

  • BED EDGER, SELF PROPELLED

    This is a self-propelled bed edger that will make a nice natural landscape edge for your beds. -"V" shaped cutter for natural edging or plastic edging -Trenching blade for installing dog fencing. -Brick rotor for laying pavers. -Self propelled unit that moves forward while trenching. -Unit dimensions = 64"L x 47"W x 47"H -Best transported on a trailer. Eq. Rents trailers available at additional charge and require a 2" ball. -Will fit in a full bed pick up truck. Will need ramps to load/unload and an area when to load/unload with a slope to take angle out of ramps.

  • BED EDGER, STANDARD

    This gas powered bed edger make a nice natural edge with a "V" shaped blade for your landscape beds as well as being used for a variety of other operations. -To operate this unit you pull backwards. -Handle can be released to do curves -This unit is NOT self propelled (see the self-propelled bed edger) -Can also be used with a redefining blade for previously cut edges, a short straight blade to trench for dog fencing, a brick paver rotor, and 1" x 7" straight blade. -Unit is 31" wide, 53" long, and weighs 160 lbs -Truck, trailer or van w/o seats to transport

  • BOX RAKE, WALK BEHIND

    Gas powered walk behind unit for preparing seed beds & small lawn repairs. If doing a large area or entire new construction lawn see Skidloader Harley rakes or Landscape Tractor Preseeder. -Designed to be used on bare dirt situations -Will pulverize, finish level and wind row rocks & debris. -Raking width is 36" -Unit dimensions = 42"W x 45"H x 76"L -Unit can be angled left or right -Will need trailer to transport. Eq. Rents trailers available at an additional charge and require 2" ball to transport

  • BRUSH CHIPPER, 3"

    A smaller chipper that will handle branches up to 3" in diameter. Does not handle vines and thin brush well. -3" branches will need any off shoots trimmed off before trying to feed. -This is a manual/gravity feed unit. NOT an auto feed unit. -Has a 18hp gas engine on a towable frame that requires a 2" ball -Unit is 62" wide x 84" long x 60" high and weighs about 1000lbs. -Unit runs on unleaded fuel

  • BRUSH CHIPPER, 6" AUTO FEED

    This large chipper will handle up to 6" diameter branches. Featuring an auto feed system this unit can handle most of your storm/brush cleanup. -25hp gas engine, weighs 2300 lbs. -Requires a 2" ball to transport -Unit is 71" wide and 124" long -Runs on unleaded fuel

  • BRUSH CUTTER

    Handheld gas powered unit can cut brush up to 3/4" diameter or grasses. -Price includes one 9" saw type blade. -Additional blades available for purchase -8 tooth style blades designed for brush -4 tooth style blades designed for grass GAS/OIL MIX INCLUDED IN RENTAL/ SHAKE CAN BEFORE FILLING

  • CHAINSAW, 16" ELECTRIC

    Electric chainsaw with a 16" blade. Works great for smaller jobs near the home or a power source. -Price includes one new chain (more chains available at additional charge) -Must be within 100 ft. of power supply w/20amp service -Comes with bar and chain oil

  • CHAINSAW, 20" GAS

    20" gas powered chain saw w/ one new chain. -One new chain with rental, additional chains available for charge -Comes with one can of mixed gas and bar and chain oil.

  • EDGER, SIDEWALK

    Gas powered sidewalk edger will help clean up those walkways and create a clean presentation. -Maximum cutting depth is 2in. -We supply a Gas Oil Mix at no Cost

  • HEDGE TRIMMER, 16" ELEC. #0013

    Not to be used with more than 100' of heavy extension cord -2 sided cutter

  • HEDGE TRIMMER, 20" GAS ARTICULATING

    20" GAS POWERED ARTICULATING HEDGE TRIMMER OVERALL LENGTH 99", 13 ANGLE SETTINGS

  • HEDGE TRIMMER, 26" ELEC.

    Not to be used with more than 100' of heavy cord. -2 sided cutter

  • HEDGE TRIMMER, 30" GAS

    Large gas powered hedge trimmer with a 30" blade. -Only one edge with cutting teeth. Approx. 3/4" cutting capacity. -Gas/oil mix included.

  • HYDROSEEDER, 600GAL.

    The hydroseeder is a fast way to start a new lawn as the seed begins to germinate in the tank. -One tank will cover roughly 6,000 sq. ft. -Unit weighs 2700 lbs empty, nearly 7,000 lbs full. -Unit is 77" high x 180" long x 94"wide -Unit comes with 175 feet of spraying hose. 600 gallon tank capacity. (takes approx. 1.5 hours to fill with single garden hose) -Mulch, tackifier, and fertilizer available at additional charge, we do not carry grass seed. Use w/paper based mulch only! -Full size truck or van with a receiver hitch and 2 5/16" ball required.

  • LANDSCAPE RAKES, 36" ALUMINUM

    Hand held landscape rakes for moving rock and gravel or help in prepping a new lawn.

  • LAWN EDGING KICKER

    Manual edging unit that the operator kicks along a bed edge to create a natural "V" edge. -Only use for small applications or a couple small beds

  • LAWN ROLLER, 24" PUSH, 250#

    Push lawn roller that is 24in. wide and 250lbs. when full of water. -Works well to help level/smooth out terrain when the ground is soft.

  • LAWN ROLLER, 36" TOWABLE

    Designed to be towed behind customers garden tractor or ATV -Unit drum is 36" wide -Unit weighs 600# when full with water -Hooks up with pin hitch

  • LAWN SPRAYER, TOWABLE

    Tows behind customers lawn tractor or ATV w/pin type hitch -Needs to runs off customers 12 volt tractor battery. -Approximate spraying width = 8' -Wand available for spot spraying -Will cover approximately 1 acre per 30 minutes - 15 or 25 gallon tank unit

  • LAWNMOWER, COMBO

    Self propelled push lawnmower that can be setup to either mulch or bag your grass clippings. -21" cutting deck.

  • LOG SPLITTER, VERT/HORIZ.

    This splitter can be used either horizontally or vertically -2" ball hitch required -Maximum log length = 24" -Weighs approximately 900# -26 ton

  • MOWER, 24" BRUSH (BILLY GOAT)

    This self propelled rough cut mower will cut a 24" wide path through brush, weeds, and tall grass. -Cuts to approx. 3.5 in. height -Unit is 31" wide, 81" long, and 43" high and weighs roughly 300lbs. -Will cut through most brush up to 1" in diameter -Works well for smaller applications although it can handle a large area with more time. -Will need truck or trailer to transport

  • MOWER, HIGH WHEEL

    Walk behind high wheel mower/trimmer. -Used for cutting through tall grass and weeds with a string trimmer line. -Unit will not cut brush -26" cutting width

  • POST DRIVER, MANUAL

    MANUAL POST DRIVER

  • POST HOLE DIG., 1 MAN

    Single man style post hole digger where engine sits on seperate cart with a torque bar between engine and auger/operator holds only auger -Accepts 6" & 8" diameter augers -For 4" x 4" posts generally use an 8" auger -Augers available in Pengo(standard) and Clay type -Extensions available to extend auger to 4' for additional fee -Can be transported in a large vehicle trunk, van, truck or trailer

  • POST HOLE DIG., 2 MAN

    A great tool for digging post footings for a deck or foundation. -This unit requires 2 people to operate -Engine sits on top of auger with 2 sets of handle bars -8" & 12" Augers available / 36" long -For 4" x 4" posts generally use an 8" auger -1 ft. extension available at additional charge to dig 48" -Mixed gas is supplied with rental

  • POST HOLE DIG., CLAMP TYPE

    Manual clamp style post hole digger. Works well for rocky ground compared to the manual twist style digger.

  • POST HOLE DIG., TOWABLE HYD

    This post hole digger is towable with a 2" ball hitch. -Augers available = 6", 8" & 12" -For 4" x 4" posts generally use an 8" auger -Pengo(standard) and Clay type augers available -Auger extensions available at additional charge to achieve 4' depth -Unit dimensions = 106"L x 34"W x 43"H -Unit weighs 575# -This unit has reverse on the auger which is helpful in rocky conditions

  • POST HOLE DIG., TWIST TYPE

    MANUAL DIGGER THAT WORKS BEST IN CLEAN DIGGING CONDITIONS

  • SLIT SEEDER, 20" PUSH

    Designed for overseeding existing lawn with thin growth or bare spots -This is a non-self propelled unit. -Slit seeding width of 20". Seed rows are spaced 2" apart -For best results slit seeding should be done in 2 directions. Do one direction and then cross at 45 or 90 degrees -Area may need to be thatched prior to slit seeding -Unit dimensions = 46"L x 27"W x 43"H Weighs 175#

  • SLIT SEEDER, SELF PROPELLED

    Designed for overseeding lawns with sparse growth or bare spots -Self propelled unit with 22" seeding width. Seeds rows spaced 2" apart -For best results slit seed in 2 directions. After working in one direction cross at either 90 or 45 degrees -May need to thatch area prior to slit seeding -Unit dimensions 60"L x 32"W x 41"H, Weighs 325# -Best transported in truck or on trailer. -Stand on chariot available at additional fee CUSTOMER SHOULD BUY UNCOATED SEED

  • SOD CUTTER, MANUAL

    A manual heal kick sod cutter with a 12" wide cut. Works well for small sod removal jobs and works best when ground is moist. -For large sod removal jobs look at our power sod cutter.

  • SOD CUTTER, POWER

    Gas powered sod cutter. -Fast cutting - approx 30 feet per minute in a straight pass -Blade is adjustable up to 2" deep, blade angle also adjustable -Dimensions: 53"L x 19"W x 39"H Weighs 300 lbs. -Needs to be transported in pick up truck or on a trailer -Some units set up with 12" wide cut, some with 18" wide cut

  • SPREADER, PUSH BROADCAST TYPE

    Push broadcast spreader for your fertilizer and weed killing need

  • SPREADER, PUSH DROP TYPE

    Drop style walk behind spreader for fertilizer, seed, etc.

  • SPREADER, TOW BROADCAST

    Designed to tow behind customers garden tractor w/pin style hitch -Capacity approximately 150 lbs.

  • STRAW BLOWER

    The strawblower works well to help keep your new seed beds in place until they can take hold in the ground themselves. -Units comes with 30' of hose -Towable unit that requires a 2" ball -Will require roughly 15-20 bales of straw per acre - Dimensions = 7' wide and 8'-6" long -For straw bales only -NO HAY- feed flats into unit from bales -2 person operation; one feeding flats, one at end of hose

  • STRING TRIMMER

    GAS/OIL MIX INCLUDED IN RENTAL/ SHAKE CAN BEFORE FILLING

  • STUMP GRINDER, 20HP SMALL

    Gas powered, self propelled machine, 20hp -Stump should be within 10" of ground level -The ground immediately around stump should be removed to eliminate any rock next to stump -Can grind to 10" below surface, although most customers stop at about 4" - 5" below ground level. -Manual sweep across stump. Will handle most stump sizes. Larger stumps will have to be taken out in sections. -Dimensions = 98"L x 34"W x 45"H, Weighs approx. 600 lbs. -Will need truck to haul. Eq. Rents trailers available at additional charge. 2" ball required on Eq. Rents trailers

  • STUMP GRINDER, 25 HP LARGE

    -Two individually controlled tracks provide a zero turning radius -27-hp Kohler EFI gas engine produces the torque needed for challenging ground conditions and stubborn tree stumps -35-in. wide footprint of and 7-in. tracks for maneuverability in tight spaces and reduced yard disruption -16-in. cutter wheel is positioned in the center of the unit for easy alignment with the stump -The ground immediately around stump should be removed to eliminate any rock next to stump -trailer to transport- Eq Rents can provide at additional charge Unit Weight is approx 1550lbs.

  • SWEEPER, GAS POWERED, 22"

    This gas powered hand held broom works great to sweep gravel out of a lawn or a ditch. Can also be used for construction site clean up. -Most often used to clean up in spring from snow plow debris. -Broom is 22" wide and weighs 30lbs. -Rubber paddle type design. -Also works for light/powdery snow removal. -We supply a Gas Oil Mix.

  • SWEEPER, TOW BEHIND

    Non powered lawn sweeper for picking up loose thatch, grass and dry leaves -Designed to tow behind customers garden tractor or ATV -Overall width of 48", sweeping width of 38" -Will need truck or trailer to transport

  • THATCHER, NON POWER

    Non-powered tow behind unit -Tows behind customers garden tractor or ATV with pin type hitch -42" wide No weight is added to this

  • THATCHERS, PUSH

    Walk behind gas powered unit -21" thatching width -Dimensions = 46"L x 26"W x 43"H, Weighs 160 lbs. -Will need mini van with back seat out, SUV with back seat down, truck or trailer to haul

  • TILLER, 13HP HYD. REAR TINE

    Hydraulic 13hp rear tined tiller -Excellent for larger areas and for breaking hard ground -Dimensions = 77"L x 27"W x 44"H, weighs 560 lbs -Tilling width of 20" -Need truck or trailer to transport. Eq Rents trailer available at additional charge. 2" ball required for Eq Rents trailer

  • TILLER, LARGE FRONT TINED

    Most popular style front tined garden tiller -Tilling width = 26" -Dimensions = 50"L x 28"W x 40"H, Weighs 143 lbs.

  • TILLER, MINI CULTIVATOR

    Excellent gas powered tiller for small gardens and flower beds -Handheld, lightweight -8" tilling width

  • TILLER, SMALL FRONT TINED

    Small walk behind gas powered tiller with tines in front. -Does not work well on hard ground or for breaking sod -Tilling width = 18", weighs 103 lbs.

  • TOWABLE RAKE / VAC

    Gas powered lawn rake & vacuum. - Works well for picking up dry leaves, thatch & other debris. - Pin type hook up onto customers tractor - Two - 45 gallon hoppers w/easy removal - 38" raking width - Will need trailer to transport - Unit dimensions 66"L x 44"W x 55"H, weighs 390# - Eq Rents trailer can be rented at additional fee, 2" ball required

  • TREE PLANTING BAR

    MANUAL UNIT FOR PLANTING SMALL SEEDLINGS

  • TREE PRUNING SAW, 10' POWER

    Gas powered tree pruning saw. -10' long pole w/10" chainsaw -Price includes one new chain. Additional chains available for purchase -Gas/oil mix and bar & chain oil included

  • TREE PRUNING SAW, 12' MANUAL

  • WHEELBARROW, CONTRACTORS TYPE

    5.5 CU. FT.

  • FERTILIZER, HYDROSEEDER 50 LBS

    WATER SOLUBLE, 50# BAG WILL DO 3- 600 GAL. HYDRO SEEDER TANKS

    Price: 59.95

  • HYCOVER MULCH

    APPROXIMATELY 3 BALES PER 600 GALLON HYDROSEEDER TANK PRICE DISCOUNT IF PURCHASING 20 OR MORE BALES

    Price: 14.95

  • TACKIFIER, 10 OZ

    1 PACKAGE IS ENOUGH FOR 1 TANK ON 600 GALLON HYDROSEEDER Used in Hydroseeder for lubrication and minor erosion control

    Price: 20.95

  • TACKIFIER, 52 OZ

    1 BOTTLE IS ENOUGH FOR 5 TANKS ON 600 GALLON HYDROSEEDER Used in Hydroseeder for lubrication and minor erosion control

    Price: 62.95

  • LIFT 50' AERIAL 4 WHEEL DRIVE

    This is a 50' self propelled lift with both a gas motor and electric motor for operation. Unit is 4 wheel drive and can handle most terrain. -Requires the gas motor to be on when driving around -Requires a minimum 19' trailer for transport which is available at an additional charge -Eq. Rents trailer weighs approx. 2500 lb & requires a receiver hitch with a 2 5/16" ball -Platform is 30" x 48" with a maximum weight capacity of 475 lbs. -Unit is 4600 lbs. and has a maximum platform height of 45' -When transporting, unit is 18'3" long X 5'6" wide X 6'9" high -With outriggers down lift will have an approx. width of 13'6" -Rated for winds maximum of 25 mph

  • LIFT' 23' PLATFORM HT.

    A 23' personal lift. This lift is meant for use with one individual in the bucket working in small areas going straight up. - For use on level surface only. -Lift will fit through a 30" wide door -Maximum lift capacity is 250lbs. at 23' platform height -This unit is not self propelled. Needs to be manually pushed around site and then manually leveled with outriggers. -Unit weighs 820 lbs. -Trailer is available for unit at an addtional cost - Eq. Rents trailer requires a 2" ball hitch

  • LIFT, 50' AERIAL

    Towable 50' aerial lift. Unit weighs 4200# with a basket capacity of 475 lbs. -Maximum platform height is 45'. Side reach varies depending on height and is measured from center of unit. -Platform is 30" X 48" -When outriggers are down unit footprint is approx 13'6" wide -Transport/stowed dimensions = 19'6"L x 77"H x 5'5"W -Trailer mounted lift that requires a receiver hitch with a 2" ball to transport -Rated for winds maximum of 25 mph

  • LIFT, 60' AERIAL

    The 60' towable aerial lift is for those extra tall jobs. This trailer mounted lift has a maximum platform height of 55' with a capacity of 475lbs. -Platform is 30"x48" with a maximum foot height of 55' -Transport/stowed dimensions = 22'11"L x 78"H x 5'5"W -Unit weighs 4800 lbs.& requires a receiver hitch with a 2" ball to transport. -With outriggers down the foot print is approx. 14'8" wide -maximum side reach varies depending on height and is measured from center of lift -Rated for winds maximum of 25 mph

  • LIFT, 19' SCISSORS

    Scissors lift with a maximum 19' platform height. The lift can handle up to 590 lbs. -For use on level hard surfaces only. -Unit is 30" wide X 65" long X 79" high and weighs 2900 lbs. -The deck will extend out approximately 2'. -Can fit through most standard size doors and tight areas. -Trailers are available at an additional charge - Eq. Rents trailer requires a receiver hitch with a 2 5/16" ball

  • LIFT, 24' TOWABLE SCISSORS

    Unit weighs 2390#. Lift weight capacity is 500#. Platform size = 48" x 94" w/additional 2' extension. Transport/stowed dimensions 113"L x 82 1/2"H x 61"W Outrigger footprint = 79" X 69". Maximum platform height = 24' 2" BALL REQUIRED TO TRANSPORT. THIS IS A TRAILER MOUNTED UNIT, IT IS NOT SELF PROPELLED

  • LIFT, 40' AERIAL

    This 40' towable telescopic lift works great for tree trimming/removal, painting, or any high reach needs. -Platform is 24" x 48" with a 475 lb. weight capacity -Maximum platform height is 36', side reach varies depending on height and is measured from center of unit. -Footprint with outriggers down is 13'6" wide -Transport/stowed dimensions = 21'11"L x 77"H x 5'5"W -Trailer mounted unit that weighs 4400 lbs. - Receiver hitch with 2" ball required. -Rated for winds maximum of 25 mph

  • LIFT, GENIE MATERIAL, 18'

    This unit is a material lift only! Not for lifting of personnel! - Lifting capacity of 650# - Maximum lift height = 18' - Unit dimensions = 71"L x 86"H x 33"W Weight = 275# - Fork dimensions = 25 3/4" x 23 3/4" Customer will need a truck w/o a cap or a trailer to transport

  • APPLIANCE DOLLY

    Trying to move a refigerator or a washer or dryer? The appliance dolly makes easy work of moving large appliances up or down stairs. -700lb. weight capacity -Straps are 13ft. long

  • BANDING KIT

    Steel banding kit to wrap your pallets or boxes with. -Requires 1/2" steel banding and sealing clips -Banding and clips are sold separately

  • FLAT CARTS, SWIVEL WHL.,600# C

    600 # weight capacity 18" wide x 30" long w/4 casters

  • HAND TRUCK, PNEUMATIC TIRE

  • HAND TRUCK, STANDARD BOX TYPE

    Standard hand truck/dolly. Unit does not have straps. Works well for boxes.

  • JOHNSON BAR, "J" BAR OR PRY BAR

  • MOVING PADS

    Approx. 3ft. X 6ft. moving pad to protect furniture & other items from damage

  • PALLET JACK

    Weight capacity = 5000# Forks dimensions = 27"W x 48"L Max height = approx. 6"

  • PIANO DOLLY, 2 PIECE WITH 4 STRAPS

    This two piece dolly will help move pianos, organs, or large chest freezers with greater ease. -Works on upright units only. -Straps are 7ft. long -Weight capacity of 900 lbs.

  • RAMP, 14' ALUMINUM

    14 ft. aluminum ramp is 24" wide and can handle approx. 1100 lbs. -Ideal for use with dock height trucks -will need a truck or trailer to transport

  • ROLLERS, MACHINERY (SET OF 4)

    This is for a set of 4 machinery rollers. Each roller has a 3.75 ton weight capacity. These are rented as a set with a 15 ton capacity

  • SHINGLE HOIST

    Ladder style shingle hoist with a gas motor that can reach up to 27'. -Can handle up to 200 lbs. or a maximum of two bundles -Requires two people to operate - one at top and one at bottom -Breaks down into multiple sections for transport -Will require a truck or trailer to transpoort

  • VACUUM CUP

    -Vacuum cups for lifting a variety of items including windows, windshields, appliances, counter tops and much more -8" diameter cup lifts up to 125lbs

  • FINISH NAILER, AIR POWERED

    Air powered finish nailer -Nails available at an additional charge. Limited size availability. -Requires a compressor able to handle 2.0 CFM @ 100PSI -Works well for casings, base, and quarter round, etc. - Uses 15 Ga. angled nails.

  • FRAMING NAILER, AIR POWERED

    Air powered framing nailer that will accept 8 - 16 penny nails. -Nails available at additional charge. Limited size availability. -Requires compressor that can produce 4CFM @ 100PSI -Compressor available as a seperate rental -31 degree clipped head nails

  • NAILER, AIR TONGUE N' GROOVE

    Air nailer for installing 3/8" to 3/4" solid or engineered hardwood flooring. Uses 1.5" or 1.75" - 18 gauge L head nails. Nails are available here. Unit has an adjustable base for various floor thicknesses. -Please note that 16 gauge nails CAN NOT be used in this gun

  • ROOFING NAILER, AIR POWERED

    Coil style roofing nailer -accepts 3/4" - 1 1/2" COIL ROOFING NAILS -requires compressor with 3/5cfm @ 100psi -Eq Rents has compressors at additonal charge

  • STAPLER, 3/8" LAMINATE FLOOR A

    Air powere laminate flooring stapler for use with 3/8" laminate floors. -3/16 crown x 1" (20 ga) staples that are available at an additional charge -Will run off Eq Rents 1 1/2hp electric compressor at additional charge.

  • STAPLER, TONGUE N' GROOVE AIR

    Air assisted stapler that requires one strike with hammer. -Requires 4.2 cfm which can be achieved with some 1.5hp or a 2hp compressors -Can be setup for 3/4", 5/8" flooring or 1/2" flooring -Staples available for sale at store -One pack of staples will cover roughly 100sq. ft.

  • AIRLESS SPRAYER

    Electric commercial sprayer for oil and latex base paints. Makes a large job seem much more manageable. -High production sprayer. -Has a suction tube that goes into a 5 gallon pail. -Paint thinning may be required for some paints -Will not spray block fillers or texture sprays (see texture sprayer) -Price includes one new tip which is good for approx. 20-25 gallons of paint -Check your paint to see if there is a suggested tip size for spray application

  • HEAT GUN

    The heat gun will help remove decals, soften adhesives and tile, and well as remove some paints/varnish. -Heats to 1000 degrees

  • PAINT STRIPER, AEROSOL LINE

    WE SELL THE TRAFFIC PAINT FOR THIS MACHINE, FOR USE ON PARKING LOTS, ETC. 1 CAN OF PAINT DOES APPROX. 200 FEET AT 3" WIDE

  • TEXTURE SPRAYER, GUN ONLY

    Texture gun for spraying textures, drywall finishes, stucco, etc. -This is the gun rental only. -Customer should supply own compressor or rent complete texture sprayer with compressor/hopper/gun. -Will not work for spraying just paint -Start in closet or on spare sheet of drywall till desired adjustments are made

  • TEXTURE SPRAYER, PRESSURIZED

    PRESSURIZED TEXTURE SPRAYER FOR WATER BASED MATERIALS ONLY. GOOD FOR SPRAYING ORANGE PEELS, KNOCKDOWNS,SPLATTER COAT, ACOUSTIC FINISHES **NOT DESIGNED FOR FINE SAND FINISHES** -DIMENSIONS: 23"L X 18"W X 40"H- WEIGHT 65LBS.

  • TEXTURE SPRAYER,COMP. / GUN

    Hopper style texture sprayer for spraying knockdown, orange peel, popcorn and sand texture finishes. -Complete unit with compressor, hopper & gun -Suggest a spare sheet of drywall or closet to start in until you have the desired finish. -Setting adjustments on compressor, trigger stop and orifice size

  • CONDUIT BENDER, 1"-1 1/4"

    Conduit bender for 1in. to 1.25in. thick wall conduit. Bender will kink thin wall conduit.

  • CONDUIT BENDER, 1/2"

    .5 in. conduit pipe bender.

  • CONDUIT BENDER, 3/4"

    .75in. conduit pipe bender.

  • FLARING TOOL 1/8"-3/4"

    Copper tubing flaring tool -Cannot be used for pipe

  • KINETIC WATER RAM

    -Works well in lines with a trap such as a bathtub. -Unit uses compressed air to open line -Customer can either use hand pump on unit or compressor to prepare unit

  • PIPE CUTTER, 2" - 4"

    2 - 4 in. pipe cutter

  • PIPE CUTTER, SMALL 1/8" - 2"

    1/8 - 2in. pipe cutter

  • PIPE CUTTER, SOIL PIPE

    Used for snapping cast iron pipe up to 6" diameter -Unit gives a clean cut

  • PIPE REAMER

    Pipe reamer to ream out 1/8" to 2" pipe after cutting it.

  • PIPE THREADER, 1" - 2" ADJUSTA

    USED TO THREAD PIPE FROM 1" TO 2" DIAMETER.

  • PIPE THREADER, 3/8" - 1" HAND

    USED FOR THREADING 3/8" TO 1" PIPE HAND THREADER

  • PIPE VISE, PORTABLE TRIPOD

    The pipe vise will help hold your pipe as you cut or ream it.

  • PIPE WRENCH, 24"

    Pipe wrench with a 24" handle

  • PIPE WRENCH, 36"

    A large long handled pipe wrench with a 36" handle Jaws open to 4.5"

  • SNAKE, 1/2" X 50' ELECTRIC

    A electric snake for use in 2-4" pipes. This snake has a 1/2" cable and is not capable of augering through roots.

  • SNAKE, 1/2" X 50' HANDCRANK

    A handcrank snake for use in 2-4" pipes. This snake has a 1/2" cable and is not capable of auguring through roots.

  • SNAKE, 1/4" X 25' POWER

    This small power snake is great for clearing any line smaller than 2" in diameter. -Works well in bathroom sinks. -Do not use in a line larger than 2"

  • SNAKE, 3/8" X 35' POWER

    Have a clogged pipe? Our power snakes will make short work of opening up a pipe with the proper application. -For use in pipes with a 2" or less diameter -Good for use in kitchen sinks, urinals, and above ground laterals 2" or less in diameter

  • SNAKE, 5/8" POWER

    Snake is for cleaning out a basement main drain line leading to the sewer. -For use in pipes 3 - 6" diameter -Unit is approximately 90' long with 2" & 3" cutters that swivel in pipe. -Units weigh approximately 160 lbs. -Will not go through most floor drains -Entry point is main clean out in home -Good for augering roots from sewer lines -Unit will not fit in trunk of car

  • SNAKE, SMALL 1/4 (HARTFORD)

    FOR USE IN PIPES LESS THAN 2" IN DIAMETER OK FOR BATHROOM SINKS AND SOME BATHTUB APPLICATIONS DO NOT USE IN LINES LARGER THAN 2"

  • TOILET/TRAP AUGER

    3 FT. IN LENGTH, USED TO UNPLUG TOILETS -goes thru toilet only

  • TUBING & CONDUIT CUTTER 1"-3"

    TUBING ONLY, NOT FOR CUTTING PIPE

  • TUBING & CONDUIT CUTTER 1/8"-1

    TUBING ONLY, NOT FOR CUTTING PIPE

  • BAND SAW, PORTABLE

    Portable handheld bandsaw to cut steel -Saw capacity = 3 1/2" round or 3 1/2" x 4 1/2" rectangular stock -Blade size is 44 7/8" x 1/2" x .020 -Blades are sold seperately

  • CIRCULAR SAW 7 1/4"

    Corded electric circular skill saw for cutting wood.

  • DRILL, 1/2" HAMMER DRILL

    Customer must supply own bits with 1/2" chuck size.

  • DRILL, 1/2" HEAVY DUTY

    Heavy duty drill with a 1/2" chuck. -Customer must supply their own bits

  • DRILL, 1/2" RIGHT ANGLE

    The drill for those tight spots. Great for drilling between floor joists and other hard to reach areas. -Customer must supply their own bits

  • DRILL, MAGNETIC BASE

    Magnetic base drill with a 3/4" drill capacity and capable of producing up to 1670 lbs. of drill point pressure. -Drill bit spins at 350 rpm and can have up to 9" of travel -Must provide your own bits.

  • GRINDER, 4 1/2" 11,000RPM

    Handheld 11,000 RPM grinder -Uses 4.5" discs -Metal and concrete grinding discs available for sale

  • GRINDER, 5000 RPM

    Handheld 5000RPM grinder. 7" unit -Metal and concrete grinding discs available for sale -Not to be used for polishing and buffing

  • GRINDER, POLISHER 1750 RPM

    1750 RPM grinder and polisher. -Lambswool pads, metal & concrete grinding wheels available for sale

  • JAMB SAW, 6 1/2"

    Jamb saw is used for cutting door jambs and moldings. -Height & depth into cut can be adjusted

  • JIGSAW, BOSCH

    Small handheld jigsaw. Pricing does not include blades. -Blades available for sale at store

  • NIBBLER,18GA.

    The nibbler will cut through / up to 18 gauge corrugated or flat sheet metal.

  • ROUTER, WOOD

    Router bits are NOT included in rate 1/4" chuck

  • SANDER, HAND ORBITAL

    Handheld FINISH sander only. -Sandpaper is not stocked on this unit -Uses 9" x 11" sheet sandpaper cut in half the long way to fit sander.

  • SAW, STEEL CHOP SAW 14" ELEC

    Steal chop saw for cutting metal. -Price does not include blade rental

  • SAWZALL, RECIPROCATING SAW

    Eq Rents stocks some blades for this unit. Blades can also be purchased at hardware or big box stores

  • SHEARS, 16 GAUGE POWER

    For use in cutting flat stock sheet metal

  • STUD GUN, 22 CALIBER LOW VELOC

    Single shot stud gun -Eq Rents sell 4 levels of loads and various sizes in pins

  • HOSE, 50' PRESSURE

    50 ft. section of pressure washing hose

  • PRESSURE WASHER 1500 PSI COLD

    1500 PSI pressure washer that works well for general cleaning on homes. Also works well for pressure washing decks, especially untreated wood decks -Operates at 3 gallons per minute at 1000PSI -Will not operate with any more than 50' of garden hose -Includes 50' of pressure hose. More hose available at extra charge. -Includes 4 tips (0, 15, 25 & 40 degree)

  • PRESSURE WASHER, 2500 PSI COLD

    2500 PSI washer works well for loose paint removal or to loosen heavy grime. Also works for deck cleaning on treated wood surfaces -Delivers 4 gallons per minute at 2500PSI -Cannot use any more than 50' of garden hose -Includes 50' of pressure hose, more is available at an additional charge -Includes 4 tips (0, 15, 25 & 40 degree) -Chemical injector also available. This is not a one step process. -The chemical is applied at NO pressure and then pressure washing is done.

  • PRESSURE WASHER, 3000 PSI COLD

    3000PSI pressure washer for all your cleaning and most paint removal needs. Be careful with high pressure on wooden surfaces. -Best unit for cleaning concrete. -For concrete cleanup works best when used with the spinning zero tip -Spinning zero is additional charge. -Delivers 4 gallons per minute at 3000PSI -Cannot use more than 50' of garden hose. -Includes 50' of pressure hose, more hose is available at an additional fee. -Includes 4 tips (0, 15, 25 & 40 degree) Chemical injector tip also available. -When using chemical injector, chemical is applied at NO pressure, then pressuring washing is done.

  • PRESSURE WASHER, 4000 PSI COLD

    4000PSI AT 3.4GPM ; GAS DRIVEN COLD WATER UNIT BEST SUITED FOR MASONRY OR STEEL SURFACES INCLUDES 4 TIPS (0,15,25 &40)

  • PRESSURE WASHER, HOT 1000PSI

    -1000psi hot water pressure -Works well to clean greasy items with heated water up to 180 degress f. -Units vary in size and are on wheels to move about. -Unit needs to be transported upright in a truck, cargo type van or trailer. -Runs off of diesel or kerosene fired burner -Requires 115V, 20amp service -Should not be stored in freezing temperatures, lines may freeze in transport during extreme cold

  • PRESSURE WASHER, HOT 3500PSI

    - 3500PSI @3.3GPM: GAS DRIVEN UNIT W/ DIESEL FIRED BURNER - WORKS WELL TO CLEAN GREASY ITEMS WITH HEATED WATER UP TO 180 DEGRESS F. - BURNER FIRED WITH DIESEL OR KEROSENE -PICKUP TRUCK OR TRAILER TO TRANSPORT -SHOULD NOT BE STORED IN FREEZING TEMPERATURES, LINES MAY FREEZE IN TRANSPORT DURING EXTREME COLD. -Dimensions: 41"L x 25"W x 41"H

  • PRESSURE WASHER, SANDBLAST ATT

    For use with 2500 or 3000psi washers -Siphons sand and mixes with high pressure water to wet sandblast -Less abrasive than standard sandblasting -Works well for recent graffiti removal on brick or block

  • PRESSURE WASHER, SPINNING TIP

    TIP ALLOWS 0 DEGREE POWER WITH COVERAGE OF 15 DEGREE TIP USE WITH 2000 PSI OR HIGHER WASHER

  • OUTRIGGERS, SNAPPY

    Outrigger for our Snappy style of scaffold and must be used anytime you are stacking scaffold sections together to broaden the base.

  • SCAFFOLD ADJ. STEM, W/ SOCKET

    USED FOR LEVELING SCAFFOLDING ON INCLINES, STAIRS, ETC. FOR 1 3/8" INSIDE DIAMETER PIPE

  • SCAFFOLD ADJ. STEM,15 W/ PLATE

    FOR LEVELING SCAFFOLDING ON INCLINES, STAIRS, ETC. FOR 1 3/8" INSIDE DIAMETER PIPE 24" OVERALL HEIGHT WITH 15" MAX. HEIGHT ADJUSTMENT; BASE PLATES ATTACHED

  • SCAFFOLD END FRAME, STANDARD

    End frames for our standard scaffold section. 5'w x 4'6"h - ladder rail on 1/2 of end frame - pipe size is 1 1/2" OD

  • SCAFFOLD OUTRIGGER, 30"

    30" wide outriggers will attach to all four sides to allow greater tower height (up to five sets high) and provide greater stability in a smaller tower if needed. -if using wheels on scaffold - will need additional 4 wheels for outriggers

  • SCAFFOLD PLANK, 7' X 19"W

    7' long x 19" wide wood plank in an aluminum hooked frame. -It takes 3 planks to completely deck a section of scaffolding

  • SCAFFOLD SIDE BRACKET

    USED FOR PERSONNEL ONLY ON STANDARD SCAFFOLD

  • SCAFFOLD WHEELS,8"

    FOR 1 3/8" INSIDE DIAMETER PIPE ON OUR STANDARD SCAFFOLD SUITABLE FOR USE ON ROUGH SURFACES

  • SCAFFOLDING BASE PLATES

    THESE SLIDE IN BOTTOM LEGS TO PROVIDE MAXIMUM STABILITY

  • SCAFFOLDING, MULTI PURPOSE

    EACH SECTION IS 6'H X 6'L X 29" ***This style scaffold cannot be stacked more than 2 high!!!!! *OUTRIGGERS SHOULD BE USED WHEN STACKING 2 HIGH ! When using outriggers base will be 5'5" wide. Plank can be set at different heights in 2" increments. Plank can also be set on different heights on each end frame to be able to use scaffold on stairs. Price includes 4 wheels. Additional 4 wheels needed when using with outriggers

  • SCAFFOLDING, STANDARD SECTION

    SECTION IS 5'W X 7'L X 4'6"H WHEN ASSEMBLED, - 1 1/2" OD pipe size / 1 1/4" ID - section consists of 2 end frames, 2 cross braces & stacking pins - planks and wheels are available at additional charge Guardrail is available at no charge with our scaffold rentals by request Call for pricing on multiple week rentals MAXIMUM OF 4 SECTIONS HIGH IN SINGLE TOWER

  • SKIDLOADER, 52HP , RUBBER TIRE

    Full size 52hp diesel skid loader. -Unit weighs 5300 - 5800 lbs and can lift up to 1700 lbs. -Maximum lifting height is 115" -Unit dimensions: 130" long, 75" high, 66" wide -Requires a trailer to transport, trailers are available for rent at additional charge. -Eq. Rents trailers weigh approximately 2500lb & require a 2 5/16" receiver type ball hitch -Variety of attachments are available for our loaders at additional charge

  • SKIDLOADER, 66HP TRACK

    A 66hp track loader offers greater lifting capacity than the wheel mount units while helping to preserve the lawn you are working over/on. -Unit is 133" long X 78" high X 67" wide with a maximum bucket pin height of 114" Lift capacity approx. 2000# -Weighs 7500 lbs. and comes with a 68" low profile bucket -Trailers are available at an additional charge -Eq. Rents trailers weigh approximately 2500 lb & require a 2 5/16" receiver type ball hitch

  • SKIDLOADER, MINI 25HP GAS

    Need that big machine feel in a tight confined space? This 20hp mini loader has many attachments available and can do much of the same work a full size loader can on a smaller basis. -Loader comes with a 45" wide bucket and is 43" high, 60" long w/o bucket or another attachment. -Unit weighs roughly 1700lbs. -Lift capacity = 450 lbs. -Attachments are available at an additional charge -Require trailer for transport, Trailers are available for rent at an additional charge. -Eq. Rents trailers require a 2" ball hitch to transport.

  • AUGER 12", SKIDMOUNT

    48" LONG AUGER USED WITH OUR SKIDLOADER POST HOLE DIGGER AUGER ONLY REQUIRES THE POST HOLE DIGGER ATTACHMENT.

  • AUGER 16", SKIDMOUNT

    48" LONG AUGER USED WITH OUR SKIDLOADER POST HOLE DIGGER AUGER ONLY REQUIRES THE POST HOLE DIGGER ATTACHMENT.

  • AUGER 24", SKIDMOUNT

    48" LONG AUGER USED WITH OUR SKIDLOADER POST HOLE DIGGER AUGER ONLY REQUIRES THE POST HOLE DIGGER ATTACHMENT

  • AUGER 30" TREE, MINI LOADER

    Specially designed post hole bit to create a 30" diameter up to 24" deep hole for tree balls. (cone shaped auger) -Can only be used with the mini skidloader with the post hole attachment -this is the auger only, attachment and loader are additional charge

  • AUGER 9", SKIDMOUNT

    42" AND 48" LONG AUGERS (DEPENDING ON AVAILABILITY) USED WITH OUR SKIDLOADER POST HOLE DIGGER AUGER ONLY REQUIRES THE POST HOLE DIGGER ATTACHMENT.

  • AUTORAKE / ROCKHOUND 66"

    Ideal skid loader attachment for grooming and finishing soil for seeding SITE MUST BE FINISH GRADED PRIOR TO USING THIS ATTACHMENT Breaks up clods, removes stones from 3/4" to 6" , levels soil Stones collect in bucket to be easily dumped 66" working width; weighs approx. 1100#; hopper holds 13 cu ft.; Standard hyd. flow 10 - 25 gpm

  • BROOM, SKIDMOUNT

    This skid mount broom attachment will help clean out large areas of rocks from lawns, sweeping snow or construction site clean up. -This is the attachment only, loader is a additional fee -Mounts on any skidloader with the universal attachment system using flat face couplers -Broom is 72" wide, weighs roughly 975 lbs., and can angle left or right 30 degrees -Requires a trailer or large flat bed truck to transport

  • BRUSH MOWER 72", SKIDMOUNT

    Rough cut skid mount mower deck. The deck is 72" wide and will work with any skidloader with the universal attachment system and flat faced couplers. Cuts brush up to 1" diameter Weighs 1100 lbs. Requires trailer or large flat bed truck to transport

  • HARLEY RAKE, SKIDMOUNT

    Skid mount harley rake with a 72" wide deck. -Works well for prepping new seed beds and removing small rocks -Weighs 815 lbs. -Flat style hydraulic coupler -Need trailer to transport or large flat bed truck -Electrical adapter is needed to angle drum

  • HYDRAULIC HAMMER, SKIDMOUNT

    Skidmount hydraulic breaking hammer. -Fits most skidloader with a universal attachment system -Uses flat style hydraulic couplers -Weighs nearly 400 lbs. -Bring truck or trailer to transport unit.

  • PALLET FORKS, MINI SKIDMOUNT

    -This is the attachment only price when rented with our machine -Rate is higher if attachment is rented without our mini loader Small pallet fork attachment for the stand-behind mini skidloader. -Maximum lifting capacity is 475 lbs.

  • PALLET FORKS, SKIDMOUNT

    Pallet fork attachment for skid loaders with the universal attachment system. -Maximum lifting weight at heighest point is 1500 lbs. -Requires truck or trailer to transport -Rate is double if rented w/o our machine

  • POST & TREE PULLER, SKIDMOUNT

    Weighs approx. 330 lbs.

  • POST HOLE DIG., MINI SKIDMOUNT

    -This is the attachment only price when rented with our machine -Rate is higher if attachment is rented without our mini loader Attachment for our stand-behind mini loaders. The mini loader can make short work of digging your post holes and fit into those tight areas the full size skidloader cannot. -Rate includes use of 9" or 12" auger -There is a 30" tree auger available at an additional charge

  • POST HOLE DIG., SKIDMOUNT

    Skid mount hydraulic post hole digger. -Fits skidloader w/universal attachment system -Fast easy way to dig any anchors or post holes -9" or 12" auger included in rental -16" and 24" augers are additional charge -3' long extension available at additional charge

  • STUMPGRINDER, SKIDMOUNT

    Stump grinder that will mount on any skidloader with the universal attachment system. -This is the rental for just the attachment -Grinder has a 24" cutting wheel, will grind stump down to 10" below the surface -Attachment uses flat face couplers -Requires truck or trailer to transport, weighs approx. 750 lbs. -Requires electrical adapter to operate

  • TEETH, MINI LOADER BUCKET

    Tooth bar that can be bolted onto our mini loader buckets. -Helps to break up hard packed ground, clay, and gravel

  • TEETH, SKID LOADER BUCKET

    A bolt on tooth bar to fit our 66" wide skidloader buckets. -Teeth help to break up loose gravel, hard ground, and clay -Teeth do not mount to all buckets

  • TREE SHOVEL, SKIDMOUNT

    Large skid mount tree shovel can dig a hole large enough for a tree with up to a 42" ball. -Spoon shaped bucket -Mounts on any skidloader with universal attachment system. -Great for planting new trees, transplanting prepackaged trees, and moving trees to a new location

  • TRENCHER, MINI SKIDMOUNT 3' X 6"

    Trenching attachment for our mini skidloader. -This attachment digs 6" wide X up to a 3' deep trench. -This is the attachment only price when rented with our machine -Rate is higher if attachment is rented without our mini loader

  • TRENCHER, SKIDMOUNT 4' X 6"

    Large skid mount trencher capable of diggin a 48" deep by 6" wide trench. -This is the rental on just the attachment -Will work with any skidloader with a universal attachment system and flat face couplers -Trencher is 48" wide at the plate and weighs nearly 1200 lbs. -Requires a truck or trailer ot transport.

  • 2-5/16 BALL 1" SHANK

    Price: 19.95

  • 5/8" HITCH PIN & CLIP, EXTRA LONG

    Price: 8.55

  • BALL, 2 5/16

    Price: 19.95

  • BALL, 2" TRAILER SALE ITEM

    Price: 9.95

  • DRAWBAR

    Price: 17.95

  • FABRICATION RECEIVER TUBE, 2" X 2"

    Price: 27.95

  • FABRICATION SAFETY CHAIN LOOP

    Price: 4.65

  • FLAT PLUG MALE & FEMALE, 48"

    Price: 6.95

  • LIGHT ADAPTOR, 6 RD TO 4 FLAT

    Price: 9.95

  • LIGHT ADAPTOR, 7 RD TO 4 FLAT

    Price: 9.95

  • LIGHT TESTER

    Price: 4.95

  • MAGNETIC TRAILER LIGHTS

    Price: 49.95

  • PIN, 1/2" HITCH PIN

    Price: 2.95

  • PIN, 5/8" HITCH PIN

    Price: 4.95

  • RATCHET STRAP

    Price: 8.95

  • TRI BALL HITCH

    Price: 65.95

  • HARLEY RAKE, 3PT 60"

    Attachment only -Used for prepping to install new seed beds -Will pulverize hardened ground, wind row rocks, clumps and debris, and finish level site -Unit weighs approx. 780 lbs -Catagory one 3pt hitch required on tractor -Customer will need a trailer to haul, may want to bring their tractor

  • MOWER, 60" ROUGH CUT 3PT.

    This is the attachment only for a tractor with a category one 3pt. hitch -Cuts a 60" wide path -Can cut up to 1" diameter woody growth down to a 3.5" depth -Requires a flat bed truck or trailer to transport

  • TILLER, 60" 3PT

    Attachment only. -Mount on category one - 3pt hitch -60" width, weighs 750 lbs. -Truck or trailer needed to transport TO BE USED ON 40HP OR LESS TRACTOR

  • TRACTOR BOX SCRAPER/SCARIFIER

    This is the attachment only for a tractor with a category one 3 point hitch. The box scraper works well for spreading top soil as well as ripping up packed dirt or some light grading. -Unit is 60" wide -Will need a truck or trailer to transport -Works on our rentable landscape tractor

  • TRACTOR, DIESEL, 4WD

    Category one 4WD landscape tractor. Runs off of a 39hp three cylinder engine. -Bucket is 60" wide, can attach a weight block to rear end for heavy loading -540 RPM PTO drive shaft -Attachments are available at an additional charge -Tractor dimensions: 110in. long (w/o bucket) X 60" wide X 97.6in. high 14' long w/bucket and no rear attachment -Fuel Capacity: 10 gal. -Unit weighs approximately 3400lbs. -Trailer available at additional charge -Eq. Rents trailers weigh approximately 2500 lb & require a 2 5/16" receiver type ball hitch

  • MAGNETIC TRAILER LIGHTS

    Magnetic trailer lights to attach to a trailer or vehicle to act us temporary replacement lights.

  • TOW DOLLY, 75"W

    2 wheel towing device - designed for front wheel drive vehicles -Vehicle should be loaded forward -Customer will need to push vehicle on if not running -Maximum vehicle tire width = 75 1/2", Maximum weight 4300#. -Will not accommodate trucks or full size vans -Will not work for vehicles with low ground clearance -2" ball hitch required

  • TOWBARS, NEW STYLE

    ONLY WORKS ON OLDER VEHICLES WITH SOLID METAL BUMPER WILL NOT WORK FOR BUMPERS ENCASED IN PLASTIC. WILL NOT WORK ON FRONT WHEEL DRIVE OR ALL WHEEL DRIVE CARS

  • TRAILER, SKIDLOADER

    DIMENSIONS AND WEIGHT CAPACITIES VARY WITH TRAILER. TRAILERS CANNOT BE RESERVED AHEAD OF TIME. CALL EQUIPMENT RENTALS FOR AVAILABILITY. RECEIVER STYLE HITCH WITH 2 5/16" BALL REQUIRED

  • TRAILER, 10' ENCLOSED

    Inside dimensions are approx. 69"W x 10'L x 72"H, may vary slightly depending on unit. -Approx. door opening = 63"W x 66"H -Empty trailer weighs approx. 1100# -Weight capacity = 1700# -Requires vehicle with 2" ball to transport.

  • TRAILER, 14' ENCLOSED

    Unit dimensions = 80"W x 72"H x 14'L -Door opening = 73"W x 65"H -GVW= 7000#- Empty trailer weighs approx. 2200#-Load weight capacity=4800# -Requires full size vehicle with receiver hitch and 2 5/16" ball -Limited availability June thru September

  • TRAILER, 5' X 10' W/SIDES

    Unit dimensions = 5'W x 10'L with 30"H sides -Weight load capacity = 1800# -Requires vehicle with 2" ball hitch

  • TRAILER, ALUMINUM CAR

    Large tilt bed aluminum car hauler. Can handle vehicles up to 4350 lbs. and the trailer has a bed size of 82" wide x 14' long. -Trailer has own tiedowns to secure vehicle -Will not work for full size pick up trucks or large vans -If vehicle is not running customer will need to push onto trailer, no winch -Requires a vehicle with a receiver hitch and 2" ball

  • TRAILER, TANDEM DUMP

    Dimensions are 6'W x 12'L -GVW = 10,000# - Load capacity is 7000# -6' x 12' units can be used for materials or equipment (based on size/weight) -Considered a 4 yard trailer, however, this is dependent on material weight For instance; sand, dirt & stone weighs approx. 2700# per yard -Requires a full size vehicle with a receiver hitch and 2 5/16" ball

  • TRAILER, UTILITY

    Single axle utility trailer -Various sizes with weight capacities up to 1600# -LIMITED AVAILABILITY -Cannot be reserved alone. -These trailers are used by customer to transport Eq Rents equipment including trenchers, stumpers, mini loaders, small mini x's, etc. -Price is discounted when rented with Eq. Rents equipment

  • BORING MACHINE, PORTA MOLE

    -Unit weighs 90#. Unit is 33" wide -Will bore up to 50 feet. -Starter trench required - minimum of 10'L x 6" wide -Water hook up is required to be run at all times to clean out bore -Bit sizes stocked: 2 1/4", 3 1/2" -Requires pick up truck or trailer to haul unit and pipe. -web link http://www.portamole.com

  • TRENCHER, 2' X 5"

    14hp Hydraulic, Self propelled, Non-Steerable unit Weighs approx. 900# Dimensions 83"L x 35"W x 46"H Maximum digging adjustable up to 2' deep, Trench width of 5" -Trailer required to transport. Trailers are available at additional charge. -Eq. Rents trailer will require a 2" ball

Categories

Rental Agencies
(262)338-6256 (262)-338-6256 +12623386256

Map 2001 Decorah Rd

Loading map...